For Sale - UM - 17403 - Battenfeld Gloucester Engineering Multi-Layer Cast Film Line
Specification
Reference Number
UM - 17403Product
Battenfeld Gloucester Engineering Multi-Layer Cast Film LinePresent Condition
Machine is in good working conditionLocation
EuropeProduct Details
Materials to be processed: Stretch film
Extruders: Nb. of extruders: 3
Extruders 1: Outside Layer A-75 mm (LD 30/1
Extruders 2: Core B-150 mm (LD 30/1
Extruders 3: Inside Layer C-75 mm (LD 30/1
Die: Cloeren USA 2650 mm Epoch™ III Auto Gauge™ 5.5 Die
Output: Up to 1350 kg/hour depending on material formulation
Chill-Roller:
Chill-roll 1 diameter & width: 1016 mm x 2750 mm
Chill-roll 2 diameter: 600 mm
Winder:
Winder: 1027S, single turret, 2 spindles with drives,
With bleed trims,
Winding drum with special perforation for air removal,
Max roll dia 600 mm, 3 inch core ID (76.5 mm; + 0,6 mm) ,
Film indexing without glue (electrostatic),
2 carbonfiber air shafts Tidland 3”
Collecting of Finished reels: Robotized fully automated system (IDASA) for reels unloading from the winder (with safety barrier) including accumulating table for 4 sets of full size jumbo reels (table can handle 16 reels of 500mm width)
Accessories:
Edge trim cutting system
Edge trim recycling system
Web guide
Screen changer – Dynisco hydraulic
Chiller – GWK system SKL 2-600 (with R134A), pump station & water tank 5000l
Gravimetric weight control system
Components blander
Thickness control – NDC tFG710 (infrared)
Corona-treater
Micro perforator
Air shafts
Extruders: Nb. of extruders: 3
Extruders 1: Outside Layer A-75 mm (LD 30/1
Extruders 2: Core B-150 mm (LD 30/1
Extruders 3: Inside Layer C-75 mm (LD 30/1
Die: Cloeren USA 2650 mm Epoch™ III Auto Gauge™ 5.5 Die
Output: Up to 1350 kg/hour depending on material formulation
Chill-Roller:
Chill-roll 1 diameter & width: 1016 mm x 2750 mm
Chill-roll 2 diameter: 600 mm
Winder:
Winder: 1027S, single turret, 2 spindles with drives,
With bleed trims,
Winding drum with special perforation for air removal,
Max roll dia 600 mm, 3 inch core ID (76.5 mm; + 0,6 mm) ,
Film indexing without glue (electrostatic),
2 carbonfiber air shafts Tidland 3”
Collecting of Finished reels: Robotized fully automated system (IDASA) for reels unloading from the winder (with safety barrier) including accumulating table for 4 sets of full size jumbo reels (table can handle 16 reels of 500mm width)
Accessories:
Edge trim cutting system
Edge trim recycling system
Web guide
Screen changer – Dynisco hydraulic
Chiller – GWK system SKL 2-600 (with R134A), pump station & water tank 5000l
Gravimetric weight control system
Components blander
Thickness control – NDC tFG710 (infrared)
Corona-treater
Micro perforator
Air shafts
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}