For Sale - UM - 23623 - 60" Battenfeld Gloucester Sheet Line
Specification
Reference Number
UM - 23623Product
60" Battenfeld Gloucester Sheet LineLocation
USAProduct Details
(3) Acrison gravimetric feeders
(2) with load hoppers,
(1) with Una-Dyne hopper dryer with loader.
90 mm Berstorff twin screw co rotating extruder,
Model ZE90R, 35:1 L/D, electrically heated, water cooled, segmented barrel with (1) feed, (5) non vented and (1) top vented and plugged barrel sections, (1) adaptor section, Flender gearbox rated 610 KW, with 700 hp, 1780/2400 rpm, 460 volt ac motor with ABB vfd controller, temperature control panel with 6 barrel, 1 adaptor, 1 screw, 1 adaptor, 1 melt pump, (7) adaptor, 7 die zone controls, built 1996.
Berringer hydraulic screen changer with hydraulic power pack.
LCI Maag polymer gear pump with 30 hp ac motor on stand with vfd motor controller.
Adaptor.
58" EDI Flexlip sheet die, model Ultraflex H-75 on cart, serial# 10-28970.
60" Battenfeld Gloucester three roll vertical sheet stack, model 2000 3 roll stack, 18" diameter x 60" wide cored rolls with rotary unions, silent chain driven with 15 hp motor drive, adjustable top and bottom rolls, with temp cooling skid with (3) heat exchangers and 10 hp pumps, 460 volt, serial# 45782-09, built 2006.
NDC thickness gauge, model Minitrak-TDI, serial# 13639, built 2006.
Enercon corona treater, model LM3530-24, serial# 14840-03.
Union Tool Corp roll coater with feed system.
Edge trim station with knife holders, manual adjustment.
Battenfeld Gloucester two roll pull stand, (2) 8" diameter x 60" rubber rolls.
Two position single head winding stand drives.
(2) with load hoppers,
(1) with Una-Dyne hopper dryer with loader.
90 mm Berstorff twin screw co rotating extruder,
Model ZE90R, 35:1 L/D, electrically heated, water cooled, segmented barrel with (1) feed, (5) non vented and (1) top vented and plugged barrel sections, (1) adaptor section, Flender gearbox rated 610 KW, with 700 hp, 1780/2400 rpm, 460 volt ac motor with ABB vfd controller, temperature control panel with 6 barrel, 1 adaptor, 1 screw, 1 adaptor, 1 melt pump, (7) adaptor, 7 die zone controls, built 1996.
Berringer hydraulic screen changer with hydraulic power pack.
LCI Maag polymer gear pump with 30 hp ac motor on stand with vfd motor controller.
Adaptor.
58" EDI Flexlip sheet die, model Ultraflex H-75 on cart, serial# 10-28970.
60" Battenfeld Gloucester three roll vertical sheet stack, model 2000 3 roll stack, 18" diameter x 60" wide cored rolls with rotary unions, silent chain driven with 15 hp motor drive, adjustable top and bottom rolls, with temp cooling skid with (3) heat exchangers and 10 hp pumps, 460 volt, serial# 45782-09, built 2006.
NDC thickness gauge, model Minitrak-TDI, serial# 13639, built 2006.
Enercon corona treater, model LM3530-24, serial# 14840-03.
Union Tool Corp roll coater with feed system.
Edge trim station with knife holders, manual adjustment.
Battenfeld Gloucester two roll pull stand, (2) 8" diameter x 60" rubber rolls.
Two position single head winding stand drives.
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}