For Sale - UM - 25391 - Krauss Maffei 300 Ton Injection Moulding Machine
Specification
Reference Number
UM - 25391Product
Krauss Maffei 300 Ton Injection Moulding MachineYear Of Manufacture
2019Location
USAProduct Details
Model:-KM300-2000CX
Mold closing force: kN 3000
Mold opening force: kN 169
Dimensions of the mounting plate (h x v): mm 995 x 1050
Clearance between columns (h x v): mm 630 x 630 - Increased width of the mold mounting plates and increased horizontal clearance between KM 300 columns by 80 mm (from 630 - to 710)
Mold opening stroke: mm 820
Minimum mold height: mm 330 - Increased by 150 mm min. mold height and max. width opening
Opening width: mm 1150
Ejector stroke: mm 200
Ejector force forward/backward: kN 58/28
Injection unit:
Screw diameter: mm 70
Thermoplastic HPS-UN screw for high performance applications - 70 mm
Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing
Ls/D ratio: -20.0
Injection pressure: bar 1877
Injection volume: cm3 1078
Injection weight 1): g 981
Injection speed: mm/s100
Injection efficiency: cm3/s385
Screw speed, standard: rpm220
Plasticization efficiency 1): - at standard screw speed: g/s 75.8
Pressure tank for increased injection power switched off by machine control
Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores.
Electric-hydraulic equipment:
Nominal power of pump motor: kW 55
Installed power of heaters: kW 29.2
Number of cylinder heating zones: -6
Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441
Oil tank capacity: dm3 720
Dimensions and weight:
Net weight with control cabinet: t 20.1
Machine dimensions (L x W x H) 3): m 6.55 x 2.17 x 2.25
Mold closing force: kN 3000
Mold opening force: kN 169
Dimensions of the mounting plate (h x v): mm 995 x 1050
Clearance between columns (h x v): mm 630 x 630 - Increased width of the mold mounting plates and increased horizontal clearance between KM 300 columns by 80 mm (from 630 - to 710)
Mold opening stroke: mm 820
Minimum mold height: mm 330 - Increased by 150 mm min. mold height and max. width opening
Opening width: mm 1150
Ejector stroke: mm 200
Ejector force forward/backward: kN 58/28
Injection unit:
Screw diameter: mm 70
Thermoplastic HPS-UN screw for high performance applications - 70 mm
Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing
Ls/D ratio: -20.0
Injection pressure: bar 1877
Injection volume: cm3 1078
Injection weight 1): g 981
Injection speed: mm/s100
Injection efficiency: cm3/s385
Screw speed, standard: rpm220
Plasticization efficiency 1): - at standard screw speed: g/s 75.8
Pressure tank for increased injection power switched off by machine control
Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores.
Electric-hydraulic equipment:
Nominal power of pump motor: kW 55
Installed power of heaters: kW 29.2
Number of cylinder heating zones: -6
Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441
Oil tank capacity: dm3 720
Dimensions and weight:
Net weight with control cabinet: t 20.1
Machine dimensions (L x W x H) 3): m 6.55 x 2.17 x 2.25
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}