For Sale - UM - 10625 - 30 liter PET Keg Stretch Blow Molding Machine
Specification
Reference Number
UM - 10625Product
30 liter PET Keg Stretch Blow Molding MachineLocation
EuropeProduct Details
Semiautomatic PET Bottle Blow Molding Machine PV-30 is a two-step bottle stretch blowing machine.
- It has 1 cavity and the capacity range of the products is from 20.0 Liter to 30.0 Liter PET KEG, barrels and cans with productivity up to 40 b/hr (30.0 Liter)
PET KEG:
- Universally suitable for numerous types of beverage.
- Fully compatible with existing tapping fittings.
- Easy handling thanks to the low weight and well thought-out design.
- Environmentally friendly, 100% keg recycling.
- Using preforms and eliminating the need for storing empty containers reduces the cost of warehousing
The manufactured containers widely used in producing carbonated drink.
The blowing machine is of the linear type for the production of PET containers by a double-stage process (from preform to bottle).
The production cycle is divided into the following stages:
- Preform loading from the heating part by operator
- Preform heating
- Preform transfer by operator to the presses
- In-line offloading of completed containers.
Technical characteristics
- Productivity (for 30.0 litre) per hour: 40
- Number of mold cavities, pcs: 1
- Pre blow-up pressure, up to, MPA: 1.6
- Main blow-up pressure, up to, MPA.5
- Control pressure, up to, MPA: 0,8
- Total weight, kg: ~1500
- It has 1 cavity and the capacity range of the products is from 20.0 Liter to 30.0 Liter PET KEG, barrels and cans with productivity up to 40 b/hr (30.0 Liter)
PET KEG:
- Universally suitable for numerous types of beverage.
- Fully compatible with existing tapping fittings.
- Easy handling thanks to the low weight and well thought-out design.
- Environmentally friendly, 100% keg recycling.
- Using preforms and eliminating the need for storing empty containers reduces the cost of warehousing
The manufactured containers widely used in producing carbonated drink.
The blowing machine is of the linear type for the production of PET containers by a double-stage process (from preform to bottle).
The production cycle is divided into the following stages:
- Preform loading from the heating part by operator
- Preform heating
- Preform transfer by operator to the presses
- In-line offloading of completed containers.
Technical characteristics
- Productivity (for 30.0 litre) per hour: 40
- Number of mold cavities, pcs: 1
- Pre blow-up pressure, up to, MPA: 1.6
- Main blow-up pressure, up to, MPA.5
- Control pressure, up to, MPA: 0,8
- Total weight, kg: ~1500
