For Sale - UM - 11990 - 3000 L 2 Layers Blow Molding Machine

Auto Loader
- Vacuum feeder: 2 sets; 500Kg/h
- Hopper; 2 sets: Drier on the machine, 300L
Common hopper on the bottom

Extruder
- Screw: 2 pcs; 38CrMoAIA azotizing, hardness = 850 HV, nitride layer thickness 0.4~0.7 mm, brittleness = grade II
F = 150 mm
L/D = 30:1
- Barrel: 2 ; 2 pcs; 38CrMoAIA azotizing, hardness = 950HV, nitride layer thickness 0.
4~0.7 mm, brittleness = grade II; assembly cooler fixed near the feeding hole.
- Motor: 2 sets; Power=132kw*2,frequency conversion motor
- Reducer: 2 sets; Model:ZLYJ375 with water cooler; Reduction ratio=16:1
- Heating zone: 2x6 pcs; Ceramic heating, stainless steel fan cover; Power=6kw*12
- Fans: 2x6 pcs; Power=0.24kw*12
- Pressure pickup: 2 sets; Shanghai Zhaohui

Die-head
- Material cylinder: 1 pc; 38CrMoAIA azotizing, hardness.850HV,nitride layer thickness 0.4`0.7 ‡o,brittleness.grade‡U
Capacity=120L(about 90kg)
- Injection oil cylinder: 1 pc; U550~500C45 injection speed. 3 kg/s
Injection Time.30s
- Injection displacement pickup: 1 set;
KTC-600
- Thickness control oil cylinder: 1 pc; 45#steel, 500 x 80 mm
- Servo displacement pickup: 1 set; KTR-100
- Servo hydraulic station: 1 set; Include servo valve, pump, pressure regulating valve, valve sensor
- Hydraulic seal: 1 set; DZ(Taiwan)
- Die-pin: 1 pc; Adjusted according to product
Ceramic,stainless steel covered
- Heating zone: 8 pcs; power = 80KW
- Die diameter: Ö300~600
- Die radial control: ±3 mm

Compound die system and molds
- Main hydraulic station: 1 pc; Tank uses 6mm steel, material Q235A
Oil capacity = 1200L
- Hydraulic seal: 1 set
-Template: 2 pcs; 45# steel, thickness 6 cm
Size=w2200 mm*h2100 mm
- Compound die oil cylinder: 3 pcs; 45# steel, ƒÓ320 mm*2CƒÓ200 mm*1Cstroke 2500 mm
Clamp force.2000 kN
Template distance: 1500 - 4000 mm
- Compound die tie rod: 2 roots;
168 mm Molds; According to the client ;
steel, Max. mold size: 2100 x 2100 mm
Molds thickness: 1500-2000 mm

Blowing device
- Extend device: 1 set
- Seal device: 1 set
- Blow and exhaust device: 1 set; Air pressure = 0.8mpa,
Air consumption=2.8 M 3/Min,
With function of exhaust control
- Convey device: 1 set
- Pneumatic valve: 1 set
- Upper distance of Inflation device: 400 ‡o

Cooling and takingout system
- Mold cooling device: 1 set; Water cooler inside the mold
- Robot: 1 set; Water cooling
- Motor: 1 pc; Power= 1.1 kw
- Linear guide: 4 pcs

Hydraulic system
- Main hydraulic station motor: 1 pc; Power= 55kw
- Main hydraulic station pump: 1 pc; Twin pump IS 41-136
- Main hydraulic station valve: 1 set
- Main hydraulic station cooler: 1 set
- Servo hydraulic station motor: 1 pc; Power=7.5 kw
- Servo hydraulic station pump: 1 pc; Single-stage pump 19
- Servo hydraulic station valve: 1 set
- Servo hydraulic station cooler: 1 set

Electrical system
- Main operation panel: 1 pc; Colorful touch screen, 10.4"
- Intermediate relay: 1 set
- Pneumatic valve: 1 set
- Thickness controller: 1 set; 100 points
- Inverter: 2 pcs; 132kw*2
- Extruder temp. module: 1 set; Automatic, error.1%
- Extruder rate module: 1 set; Automatic, error.1%

Frame
- Body frame: 1 set
- Motor of upper plateau: 1 set; Power=2.2kw
- Linear guide: 4 pcs
- Lifting distance of upper plateau.: 400 mm

Complete machine
- Total power: About 485kw
- Average power consumption: About 290 kw
- Machine size (LXWXH): 8500 x 6000 x 6500 mm
- Machine weight: 48T
- Plasticizing capacity: 800 kg
- Material: HDPE, MFI .0.09(190oC/21.6kg) , UHMW- PE
- Product capacity: 500L~300L
- Layer: 2