For Sale - UM - 9054 - 6" Randcastle / Collin Sheet Line
Specification
Reference Number
UM - 9054Product
6" Randcastle / Collin Sheet LineLocation
USAProduct Details
(1) used Randcastle / Collin sheet line consisting of the following
- (1) used 1" Randcastle single screw extruder
- 40:1 l/d
- Electrically heated
- Air cooled barrel
- Jacketed feed section
- Koellmann gearbox rated 12.5 hp
- 1.6 service factor
- 11.49:1 ratio
- 152 rpm output speed
- 5 hp Reliance inverter duty motor
- 460 volt
- 1760 rpm with VFD controller
- Control panel with (4) barrel
- (1) adaptor
- (1) transfer tube
- (1) die zone with temperature controllers
- One (1) used Brabender loss in weight feeder
- Model: FW18-5
- Stainless steel hopper and feed screw with controller
- New 2004
- One (1) used Cloren flex lip sheet die, Model 6" Masterflex, R bar, flexible upper lip on stand, job# 06-8340
- (1) used Collin laminating three roll sheet stacks
- Type Chill Roll
- 9" wide roll face
- 3" diameter adjustable top roll
- 6" diameter fixed middle and bottom rolls
- Cored rolls
- 24 KW stack drive with VFD controller
- laminating attachment with unwind and rewinders
- 24 KW unwind motor drive
- 1.9 KW rewinder drive
- Dual position main winder with
- 18 KW motor drive
- 42.5" line center line height.
- (1) used 1" Randcastle single screw extruder
- 40:1 l/d
- Electrically heated
- Air cooled barrel
- Jacketed feed section
- Koellmann gearbox rated 12.5 hp
- 1.6 service factor
- 11.49:1 ratio
- 152 rpm output speed
- 5 hp Reliance inverter duty motor
- 460 volt
- 1760 rpm with VFD controller
- Control panel with (4) barrel
- (1) adaptor
- (1) transfer tube
- (1) die zone with temperature controllers
- One (1) used Brabender loss in weight feeder
- Model: FW18-5
- Stainless steel hopper and feed screw with controller
- New 2004
- One (1) used Cloren flex lip sheet die, Model 6" Masterflex, R bar, flexible upper lip on stand, job# 06-8340
- (1) used Collin laminating three roll sheet stacks
- Type Chill Roll
- 9" wide roll face
- 3" diameter adjustable top roll
- 6" diameter fixed middle and bottom rolls
- Cored rolls
- 24 KW stack drive with VFD controller
- laminating attachment with unwind and rewinders
- 24 KW unwind motor drive
- 1.9 KW rewinder drive
- Dual position main winder with
- 18 KW motor drive
- 42.5" line center line height.
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}