For Sale - UM - 22501 - Hobema 5 Colours Flexo Printing Machine
Specification
Reference Number
UM - 22501Product
Hobema 5 Colours Flexo Printing MachineYear Of Manufacture
1992Location
-Product Details
Table napkin producing machine
Operating formats: 330×330 mm and 300×300 mm
Unwind stand
turret type, for parent rolls of max. 1500 mm diameter, – lift for the reel positioning, – diameter of roll core 76 mm, – single motor drive with flat belt for the reel, – automatic machine stop at reel end.
Printing Units
five printing units with ceramic coated anilox
anilox: 120, 120, 160, 195, 195 l/cm
rubber-covered roller, – print mandrels for sleeves 300×300 mm and 330×330 mm
impression cylinder with special hard coating
fine thread for backlash free adjustment
drive from main motor through a gear
quick-change device for print mandrels
inkwell: closed ink circulation with ink pump
splash-proof design
easy cleaning
protection covers
Infra-Red Dryer
with 16 IR radiator, 3kW each,
adjustable heating, * separate exhausters for hot air, humidity and ink fumes
Stabilizing Drum
drum for stabilizing the web for improved printing quality and perfect web tension
Embossing Station
web positioning in front of embossing station
two sets for embossing,
steel to paper embossing rolls 330×330mm,
with one pattern on the width and two pattern
on the circumference,
gap adjustment of embossing rollers,
hydraulic positioning of embossing rollers.
Folding unit – strobe light for print adjustment, – folding triangle made of steel, – two pulling rolls made of hardnes steel, – two cylinders with grippers for web distributing,
Machine is equipped with aditional folding unit: for format 330×330 mm and 300×300 mm (frame with grippers cylinder and gears).
Cutting Knife
Rotating endless knife for tissue band cutting).
automatic transfer to WRAPPING MACHINE, – conveyor belt with two independent conveyor lines, – two grippers unit for discharging into conveyor belt, – two elevator unit for charging conveyor of wrapping machine.
General
Electrical equipment: 230/400 V, 3-phases, 50 Hz, Serwo drive motor, PLC – control unit Siemens S5, acoustic alarm signal at machine start
Lubrication automatic central lubrication, – Pneumatic ¾” compressed air connector, 6–8 bar compressed air supply.
HEINO ILSEMANN Tissue Wrappping Machine Type: NW-10S Built: 2003 Operating formats: L165×W165×H25mm.
Mechanics
Machine has three main ranges:
Feeding area
Foil system
Outfeed area with side sealing
Product Infeed Chain
Has a product guiding and collapsible carrier assuring a high safety level during manual operation.
Foil Feeding System
The foil cut-off length is ontrolled by a servo motor. The foil is transported by means of suction belts.
Wrapping Material
Polypropylene-foil (PP), heat sealable approx. 30… 40 µm
Polypropylene-foil (OPP), heat sealable approx. 22…35 µm
Polyethylene-foil (PE), heat sealable approx. 35… 40 µm
Core diameter 76,2 mm = 3“.
Operating formats: 330×330 mm and 300×300 mm
Unwind stand
turret type, for parent rolls of max. 1500 mm diameter, – lift for the reel positioning, – diameter of roll core 76 mm, – single motor drive with flat belt for the reel, – automatic machine stop at reel end.
Printing Units
five printing units with ceramic coated anilox
anilox: 120, 120, 160, 195, 195 l/cm
rubber-covered roller, – print mandrels for sleeves 300×300 mm and 330×330 mm
impression cylinder with special hard coating
fine thread for backlash free adjustment
drive from main motor through a gear
quick-change device for print mandrels
inkwell: closed ink circulation with ink pump
splash-proof design
easy cleaning
protection covers
Infra-Red Dryer
with 16 IR radiator, 3kW each,
adjustable heating, * separate exhausters for hot air, humidity and ink fumes
Stabilizing Drum
drum for stabilizing the web for improved printing quality and perfect web tension
Embossing Station
web positioning in front of embossing station
two sets for embossing,
steel to paper embossing rolls 330×330mm,
with one pattern on the width and two pattern
on the circumference,
gap adjustment of embossing rollers,
hydraulic positioning of embossing rollers.
Folding unit – strobe light for print adjustment, – folding triangle made of steel, – two pulling rolls made of hardnes steel, – two cylinders with grippers for web distributing,
Machine is equipped with aditional folding unit: for format 330×330 mm and 300×300 mm (frame with grippers cylinder and gears).
Cutting Knife
Rotating endless knife for tissue band cutting).
automatic transfer to WRAPPING MACHINE, – conveyor belt with two independent conveyor lines, – two grippers unit for discharging into conveyor belt, – two elevator unit for charging conveyor of wrapping machine.
General
Electrical equipment: 230/400 V, 3-phases, 50 Hz, Serwo drive motor, PLC – control unit Siemens S5, acoustic alarm signal at machine start
Lubrication automatic central lubrication, – Pneumatic ¾” compressed air connector, 6–8 bar compressed air supply.
HEINO ILSEMANN Tissue Wrappping Machine Type: NW-10S Built: 2003 Operating formats: L165×W165×H25mm.
Mechanics
Machine has three main ranges:
Feeding area
Foil system
Outfeed area with side sealing
Product Infeed Chain
Has a product guiding and collapsible carrier assuring a high safety level during manual operation.
Foil Feeding System
The foil cut-off length is ontrolled by a servo motor. The foil is transported by means of suction belts.
Wrapping Material
Polypropylene-foil (PP), heat sealable approx. 30… 40 µm
Polypropylene-foil (OPP), heat sealable approx. 22…35 µm
Polyethylene-foil (PE), heat sealable approx. 35… 40 µm
Core diameter 76,2 mm = 3“.
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}