For Sale - UM - 33106 - Rpet Production Line
Specification
Reference Number
UM - 33106Product
Rpet Production LineLocation
-Product Details
Die Width:- 1710 Mm
Mechanical Speed Max:- 420 m/Min
Net Working Width Max:-1600 Mm
Max Melting Capacity:- 720 Kg/Hr
The Pet Flakes Are Fed Directly Into The Dryer By a Feeding Screw. The Feeding Screw Is Also Equipped With a Metal Detector For Automatically Separating Material Contaminated With Metals. In The Dryer, The Hot Air Heats The Material. This Process Dries The Material And Serves For Optimum Material Preparation Before Extrusion.
Vessel Diameter: 1000 Mm
Vessel Volume: 1500 L
Suction And Gravimetric Dosing Unit
The Raw Material Is Transported To The Gravimetric Dosing Unit Above The Extruder, Where Each Component Is Individually Weighed Before Being Fed Into The Extruder Intake Zone. The Material Feeding Is Done With The Central Vacuum Station Incl. Dust Filter.
Number Of Main Components: 1 (100 l Each)
Number Of Additives: -3 (10 l Each)
Edge Trim Recirculation: Direct Feedback From Edge Trim Cutting Unit
Extruder Exp125 Hc
Including Melt Pressure Sensor, Melt Temperature Sensor, And Control Air Conditioning For Electronical Components And Control Panel. The Extruder Barrel Is Of a Bimetallic Design. The Screw Is Nitride-Hardened And Armor-Plated. The Extruder Screw Plasticizes And Homogenizes The Material. The Extruder Is Equipped With a Melt Pressure Display.
Max. Extruder Output :-720 Kg/h
Extruder Screw: -125 Mm
Melt Pressure Display & Alarm
Melt Temperature Display
Backflush Filter System For Pet
Melt Pump For Pet
Melt Pressure Gauge
Smarttronic Processor Control For Tape Stretching Line
Flat Die 1710 Mm
Chill Roll And Holding Unit
Slitting System Take Off Unit And Holding Unit
Automatic Knife Bar Changer
Scanning Gauge And Control System For Thickness Measurement 1600 (Ndc)
Edge Trim Refeed System Tape Stretching Section Tape Extraction – Vacuum System
Control Cabinets
Mechanical Speed Max:- 420 m/Min
Net Working Width Max:-1600 Mm
Max Melting Capacity:- 720 Kg/Hr
The Pet Flakes Are Fed Directly Into The Dryer By a Feeding Screw. The Feeding Screw Is Also Equipped With a Metal Detector For Automatically Separating Material Contaminated With Metals. In The Dryer, The Hot Air Heats The Material. This Process Dries The Material And Serves For Optimum Material Preparation Before Extrusion.
Vessel Diameter: 1000 Mm
Vessel Volume: 1500 L
Suction And Gravimetric Dosing Unit
The Raw Material Is Transported To The Gravimetric Dosing Unit Above The Extruder, Where Each Component Is Individually Weighed Before Being Fed Into The Extruder Intake Zone. The Material Feeding Is Done With The Central Vacuum Station Incl. Dust Filter.
Number Of Main Components: 1 (100 l Each)
Number Of Additives: -3 (10 l Each)
Edge Trim Recirculation: Direct Feedback From Edge Trim Cutting Unit
Extruder Exp125 Hc
Including Melt Pressure Sensor, Melt Temperature Sensor, And Control Air Conditioning For Electronical Components And Control Panel. The Extruder Barrel Is Of a Bimetallic Design. The Screw Is Nitride-Hardened And Armor-Plated. The Extruder Screw Plasticizes And Homogenizes The Material. The Extruder Is Equipped With a Melt Pressure Display.
Max. Extruder Output :-720 Kg/h
Extruder Screw: -125 Mm
Melt Pressure Display & Alarm
Melt Temperature Display
Backflush Filter System For Pet
Melt Pump For Pet
Melt Pressure Gauge
Smarttronic Processor Control For Tape Stretching Line
Flat Die 1710 Mm
Chill Roll And Holding Unit
Slitting System Take Off Unit And Holding Unit
Automatic Knife Bar Changer
Scanning Gauge And Control System For Thickness Measurement 1600 (Ndc)
Edge Trim Refeed System Tape Stretching Section Tape Extraction – Vacuum System
Control Cabinets
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}