For Sale - UM - 33059 - Shaoyang Non Woven Production Lines
Specification
Reference Number
UM - 33059Product
Shaoyang Non Woven Production LinesYear Of Manufacture
2020Location
TurkeyProduct Details
Suitable for the production of spunbond nonwovens with a variety of colors and different properties using PP chips as main material mixed with master batch, antioxigen, anti-pilling agent and flame retardant.
Raw material: Polypropylene chips (Melt index: 30-40g/10min, with variation not more than 1% for each batch; Melt point: 166?; Ash content: <0.15-0.25%)
Annual output: 2000 tons (say 8,000hours based on 2.2denier single filament )
Extruder size: f130×32
Max. winding diameter: 1000mm
Process speed: 10-130m/min
Installed power: approx. 700kW
Web width: 1600mm
Single filament titer: 1.8-2.2 denier
Web weight: 10-150g/m2
1. Dosing and mixing system
Chips are transported by a suction system from the ground to the dosing and mixing system on the third floor. Main material and auxiliary materials can be prepared as per a certain ratio. The whole system consists of the following:
Consisting of a main material tank, two auxiliary tanks, a mixing tank, a suction device, a metal detector, complete with an alarm unit for low and high chip levels, automatic control of feeding.
The main material is suctioned automatically with the ancillary material filled manually. Dosing screws are used for filling proportionally.
Max. feeding capacity for main material: 480kg/hr
Volume of storage hopper: 0.6m3
Max. mixed components: 3
Used to melt and extrude PP chips mixed with master batches and additives such as antioxidant, anti-pilling agent and flame retardant agent, including chip inlet, automatic temperature controls, cooling system, alarm system for all the heating zones with temperature meter, solid relay and pt100 platinum resistance.
Max. extruding capacity: 350kg/hr
Diameter of screw: 130mm
L/D: 32
No. of heating zones: 7
Raw material: Polypropylene chips (Melt index: 30-40g/10min, with variation not more than 1% for each batch; Melt point: 166?; Ash content: <0.15-0.25%)
Annual output: 2000 tons (say 8,000hours based on 2.2denier single filament )
Extruder size: f130×32
Max. winding diameter: 1000mm
Process speed: 10-130m/min
Installed power: approx. 700kW
Web width: 1600mm
Single filament titer: 1.8-2.2 denier
Web weight: 10-150g/m2
1. Dosing and mixing system
Chips are transported by a suction system from the ground to the dosing and mixing system on the third floor. Main material and auxiliary materials can be prepared as per a certain ratio. The whole system consists of the following:
Consisting of a main material tank, two auxiliary tanks, a mixing tank, a suction device, a metal detector, complete with an alarm unit for low and high chip levels, automatic control of feeding.
The main material is suctioned automatically with the ancillary material filled manually. Dosing screws are used for filling proportionally.
Max. feeding capacity for main material: 480kg/hr
Volume of storage hopper: 0.6m3
Max. mixed components: 3
Used to melt and extrude PP chips mixed with master batches and additives such as antioxidant, anti-pilling agent and flame retardant agent, including chip inlet, automatic temperature controls, cooling system, alarm system for all the heating zones with temperature meter, solid relay and pt100 platinum resistance.
Max. extruding capacity: 350kg/hr
Diameter of screw: 130mm
L/D: 32
No. of heating zones: 7
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}