For Sale - UM - 19636 - SIG Corpoplast PET Bottle Production Line

Production capacity: 300 bottles/min(18,000 bottles/hour)
Production bottle volume: 0.2~2 Liter

Main Equipment Line>
Blow molding machine
Perform feeder system
Pet Wall Profiler & Process pilot(Year: 2011)
Mold temperature control machine
Chiller
Cooling tower
High pressure compressor

1. Blow molding machine
Manufacturer: SIG Corpoplast (German make)
Model: BLOMAX 18CS3
Production capacity:310 bottles/min(18,600bottles/hour)(Bottle size)
Volume: 0.2~2 liter
Max. diameter: 115mm
Length: 107mm~350mm (Preform dimensions)
Length: 60mm~185mm (Machine components)
Transport mandrels: 280 units
Preform pockets loading station: 12units
Mandrel supports heating chain: 252units
Transfer arms station1: 8units
Transfer arms station2: 8units
Transfer arms station3: 8units
Blowing stations: 18units
Stations loading/unloading wheel: 10units
Stations turning wheel: 10units
Heater boxes: 15units
Preform container: 3m3
Preforms: 21000units
Sufficient for operating time: 39min. (Compressed air)
Blowing air pressure: 40 bar below
Blow air consumption(1.5 liter bottles, 35bar): 1860Nm3/hour
(Cooling water circuit)
Cooling agent(including antifreeze agent): water
Water pressure: 7.5bar
Flow rate: 24m3/h
Cooling load(1.5 liter bottles, 30g): 68kW
(Heating agent circuit)
Tempering agent(including corrosion preventing agent): hot water
Water pressure: min. 6.5bar
Water temperature: max. 120
Flow rate: 24m3/h
Heating power: 60kW
(Electrical data)
Frequency: 50hz
Total capacity: 317kVA
Drives and control: 11kVA
Other loads: 16kVA
Installed heating capacity: 285kW
Consumption(1.5 liter bottles. 30g): 162kWh
(Machine data)
5200mm(W) x 9300mm(L) x 3100mm(H)
Required space: 10. 6 m x11.6m
Weight: 27.65on

2. Perform feeder system
Manufacturer: M. TANNER (Swiss make)
Model: VZT-4011
Container size: 1100 x100 x1055(330kg)
Process Capacity(2 liter): 300bottles/min(18,000 bottles/hour)
(Main components)
Switching cabinet PST
Roller conveyor
Feeder rail
Return

3. Pet wall profiler
Manufacturer: AGR(USA make)
Manufacturing year: 2011
Minimum height: 102mm
Bottle diameter: 50.8mm~125mm
Bottle thickness: 0.05mm~0.76mm
Inspection rate: 150,000 bottles/hour