Technical Papers Plastics
Electroactive polymer market to reach US$245 mln in 2013

Electroactive polymer market to reach US$245 mln in 2013

14-May-13

Electroactive polymers are one of the most promising technologies. Compared to inorganic materials the versatile polymers have various attractive properties, such as being lightweight, inexpensive and easy to manufacture. Tremendous amount of research and development has led to Electroactive Polymers (EAP) that can also change size or shape when stimulated by the right external electrical activation mechanism, meaning they can convert electrical energy into mechanical energy. Electroactive polymer (EAP) market will reach US$245 million in 2013. The materials have been used for some time in actuators, capacitors and nanocomposites, but with new recent technical progress, comes new growth opportunities. Despite several decades of R&D and first applications, the EAP field is still far from mature. Challenges, such as performance, long-term stability, and reliable mass production need further development to tailor the properties to the requirements of each target application. The market potential as forecasted by IDTechEx Research is as high as US $2.25 billion by 2018, dominated by consumer electronics, actuators, and sensors applications.

EAPs are part of the broad group of smart materials. The use of polymers with electroactive response has only emerged in the last decade with the introduction of new materials which have significant displacement levels. These materials are highly attractive for their low-density, large strain capability, superior spectral response, and resilience. In general, the biggest advantages over conventionally used systems in most application fields are the intermittent displacement they can provide, an adaptable stiffness combined with variable size and form factors from micrometers to meters. Companies like Artificial Muscle (AMI) of Bayer MaterialsScience and Strategic Polymers (SPS) have been able to tune the properties even further. AMI’s were able to eliminate the issues with high driving electric fields. Their dielectric EAP based actuator has an average power consumption of just 1.5mW and already passed mobile qualification tests. And SPS’ PVDF terpolymer based EMP actuators show comparable high deformation strain in the range of 0.5 to 2.5%. The market potential is large: EAPs can be used in various applications including actuators and sensors, biomimetics, and robotics, energy harvesting, and storage devices. Dielectric sensors are already in use for a wide range of applications, e.g., surface or bulk measurements sensors. Especially in the actuators segment, vast R&D activity can be seen for specialized applications such as medical devices and biomimetic-robotics. Here the features of electroactive polymers are used to enable movement and generate force as well as electrically control surface properties. However, these are very demanding markets, with high-performance requirements and also restrictions especially in the medical field, which is why it will take at least five more years before revenues grow significantly.

Already in fairly high production are dielectric elastomer materials commercially available from sources like 3M, and also piezoelectric fluoropolymer (PVDF), that is used in actuators, nanocomposites, and capacitors. However, these materials are not universally suitable. Especially for dielectric elastomers the main issue hindering the wide-spread application is the high operating voltage required. New growth needs to come from new innovation--improved materials suitable for less demanding high-volume applications, such as consumer electronics and large-area thin-film sensors. With touch screens everywhere it almost seems natural to expand the user experience with better feedback. Implementation of EAPs for haptic feedback, especially for hand-held touch screen devices and peripherals, is the current new market focus. Compared to inertial actuators currently the standard, EAP ones have the advantage of being able to just move the touch screen, and having a high bandwidth necessary for high-fidelity touch feedback. One of the biggest challenges at the moment is the cost of EAP devices in consumer electronics. This is why high-fidelity and large screen applications will come first. Research is on-going in this medium to longer-term opportunity, where EAP based systems can be used to harvest the energy from sea waves. In comparison to conventionally used hydraulic systems, electroactive polymer ones offer lower production costs and higher durability.

IDTechEx estimates the electroactive polymer market volume to grow almost tenfold in the next five years, dominated by consumer electronics (38%), actuators, and sensors applications. The most prominent application is haptics for portable consumer devices with a touch screen. Sensors, i.e., large-area ones and medical applications, will come next. For energy harvesting applications, especially from ocean waves, it will take another decade until the market will see first commercial penetration. The following chart gives the market size by value of the finished device (including driving components). Actuators and sensors are the most common application for electroactive polymers today and will remain prominent in the next five years. The highest potential lies in new application fields, such as consumer electronics, where first prototypes and evaluation studies have been just recently demonstrated. For medical and energy harvesting applications the next 5 to 10 years are crucial. Intensive R&D towards better efficiency, long-term stability, salt-water resistance and up-scale of production from laboratory state to commercial production is needed. Haptics for consumer portable touch screen devices and peripherals is going to be the next big application and potentially the first large-scale implementation of EAP actuators in general with an expected penetration of 60% for haptic feedback in mobile phones for 2018. Until now, despite several decades of R&D and first applications, the EAP field is far from mature and several subjects, such as performance and long-term stability, still need further development to tailor the properties of these polymers to the requirements of each application. The large-scale penetration of the touch screen market will finally take the technology to the next level. This success will account for over 40% of the expected total revenue in 5 years. Other applications with great potential in +5 years from now include energy harvesting from see waves, medical applications, both invasive and non-invasive, large-area sensors, speakers etc. Especially for energy harvesting and the medical sector the technology needs to prove its suitability and improve efficiency as well as long-term stability before it can finally become commercial.

  Back to Articles
{{comment.Name}} made a post.
{{comment.DateTimeStampDisplay}}

{{comment.Comments}}

COMMENTS

0

There are no comments to display. Be the first one to comment!

*

Name Required.

*

Email Id Required.

Email Id Not Valid.

*

Mobile Required.

Email ID and Mobile Number are kept private and will not be shown publicly.
*

Message Required.

Click to Change image  Refresh Captcha

pmmai

telluswhatyouwant

used-plastics-Machinery-required

IBC blow moulding line with frame machine

IBC blow moulding line with frame machine