Technical Papers Plastics
Global specialty films market to reach US$29.77 bln in 2014

Global specialty films market to reach US$29.77 bln in 2014

Techno - commercial information on plastics Industry - News on Plastics Industry -
Global specialty films market to reach US$29.77 bln in 2014

Global specialty films market to grow at 6.1% pa till 2014

The global market for specialty films is projected to be US$22.18 bln in 2009. Representing a healthy CAGR of 6.1%, the market is forecast to grow by an overall 34.2% to reach US$29.77 bln by 2014, according to a new study by Pira International. Specialty films are films that have a special function or feature, and are often referred to as 'high-performance polymers'. They are essentially newer, relatively small-volume, niche polymers and are more expensive than commodity films. Six major resin classes generally make up the specialty films category, i.e. polyesters, nylons, polyolefin-based films such as EVOH and PVdC, polycarbonates, fluoropolymers and polyamides. The key trends expected to drive the specialty films industry in the 2009-14 period include the technologies capable of making polymers more sustainable, compostable, recyclable and re-usable over longer time spans, as also polymers that can show increased yields while cutting down on material use and costs. Increasing demand for fresh, longer-lasting food products is also a prime catalyst for booming sales for flexible packaging, which represents the most dynamic sector in the specialty films industry. Satisfying customers through competitive pricing, ability to meet stringent client specifications, and ease of processing on faster machines is now perhaps the critical industry differentiator. To achieve this optimum balance, specialty film producers in developed countries have been increasingly shifting their plant and research and developments sites to favourable offshore locations like Eastern Europe, India, Northern Mexico, Indonesia and Vietnam in 2008 and 2009.
The barrier films market, which constitutes half of all demand for specialty films in 2009, is by far the largest sector in the industry. The report states that the global sales of barrier films are expected to be close to US$12 bln in 2009, and this is forecast to increase to US$14.6 bln by 2014. The annual growth rates for the three categories of film covered in the report (oxygen and gas-barrier films; moisture-barrier films; and other barrier films) are below the market average, but this is the norm for such a mature segment. However, the magnitude of sales in the sector is attracting substantial money for research and development activities which, in turn, is bringing in a host of new products into the market. According to the study, the four key areas of innovation in the specialty films industry in 2009 have been bio-plastic films, films for organic light emitting diodes(OLEDs) and solar cells, conductive films and films for the photovoltaic module market. The biodegradable, water-soluble and food contact versions of specialty films have been performing well despite the current economic climate, with their projected sales growth expected to be 13%, 9.8%and 8.3% respectively in the forecast 2009-14 period. Bio-based polymers are predicted to witness annual growth rates of 13% in the 2009-14 period, more than double the normal market average. With regard to end-use segments, photovoltaic modules, bags, and safety and security films will perform impressively during this forecast period. Region-wise, South America, Eastern Europe and Asia (with the exception of Japan) will perform well above the global average, while the mature North American and Western European markets are expected to perform below the global average. Despite the shadow of economic recession, the estimated growth rates in developed nations like Japan and the UK will be fairly satisfactory, with CAGRs of 3.3% in Japan and 5.5% in the UK. Demand for newer generations of specialty films like the bio-based and photovoltaic module sectors, is driving most of this sales growth. Emerging countries like the BRIC nations (Brazil, Russia, India and China) will have the highest growth rates, with CAGRs ranging from 9.1% in Russia to 10.3% in Brazil.
Demand for specialty films is forecast to advance 4.7% pa to US$7.6 bln in 2012 as per Freedonia. Gains will be driven by the increasing need for high-performance plastic films that offer such benefits as barrier properties, mechanical strength and chemical resistance in packaging and construction applications. The penetration of specialty films into new, high-growth market areas such as photovoltaic modules and biodegradable bags will also bolster advances in demand. The rapid adoption of modified atmosphere packaging, which can extend the shelf life of packaged food products, will fuel further gains, as will improve processing methods in film coating and metallization.
Barrier films will remain the largest segment of the specialty films industry, accounting for over half of total demand in 2012. Above-average growth will be driven by the rapid rise of case-ready technology in meat packaging, which requires barrier films to maintain an optimum atmosphere inside the package. These opportunities will spur advances for plastic films produced from ethylene vinyl alcohol, nylon and polyvinylidene chloride resins. Gains will also benefit from the increased use of specialty barrier films in pharmaceutical blister packaging applications, particularly fluoropolymer and nylon films in multilayer constructions. Additionally, improvements in metallization technologies are allowing metallized films to become a cost-effective replacement for film/foil and film/paper laminates in food packaging applications. Safety and security films and light control films are two closely related groups of specialty films, as both are applied to glass substrates and are used in motor vehicles and buildings. While the use of polyvinyl butyral interlayer films in laminated vehicle glass is highly mature and offers minimal opportunities for growth, better prospects are expected for light control films. These films can reduce energy costs in buildings by controlling the transmission of light through windows. Demand for light control films will also benefit from emerging applications in the fast-growing photovoltaic module market. The most rapid growth in specialty films will occur in biodegradable and water soluble films, which will see double-digit gains from a small base. Demand for biodegradable films, which are used to produce compostable kitchen and lawn bags, will benefit from environmental concerns and increased commercialization of bio-based polymers. Water soluble film demand will receive a boost from the introduction of medicinal and health products in dissolvable thin film
  Back to Articles
{{comment.Name}} made a post.




There are no comments to display. Be the first one to comment!


Name Required.


Email Id Required.

Email Id Not Valid.


Mobile Required.

Email ID and Mobile Number are kept private and will not be shown publicly.

Message Required.

Click to Change image  Refresh Captcha



DCM 54 inch lamination lines

DCM 54 inch lamination lines