Forgot password?Register for an account?
Email Id Not Valid.
Share This Page
Listing of refurbished single screw extruder, used twin screw plastic extruders, second hand conical screw extruders for pipes, profiles, compounding and other used extrusion plants. For more details contact us on email@example.com
For Sale - Used Plastic Extruders, Twin Screw Extruder, Conical Screw Pipe Extruders
Model: ZSK 133 SC
- Gear box ratio: 7:1
(For details, please see next pages)...
- Screw diameter: 200 mm
- L/D Ratio: 12 with manual operated screen changer
- Without electrical panel & motor
2-1/2" Sterling Extruder
L/D Ratio: 36:1
DC Motor With Baldor DC Drive
(5) Barrel Zones
(1) Die Zone
Amp Meters With Each Zone
2" Sterling Single Screw Extruder
L/D Ratio: 36:1
Water Cooled Barrel
Center Of Vent: Approximately 38" From Center Of Feed Throat
2" Round Feed Throat Clamp
Air cooled barrel,
Jacketed feed section,
Driven by 200 hp dc motor,
1750/2000 rpm, 500 volt,
Gearbox rated 525 hp,
1.5 service factor,
Water cooled (missing manifold, pump, reservoir and heat exchanger),
34:1 L/D, vented barrel, jacketed feed section,
400 hp dc motor with scr, 17.21:1 gearbox rati......
Air cooled barrel,
40:1 L/D, vented barrel,
700 HP DC motor through Lufkin gearbox,
112 rpm screw speed, with control panel
18 mm Betol Pelletising Line with 18 mm 25D Single Screw Betol Extruder With
1. Mono Layer Film Plant
2. LLDPE/HDPE/LDPE Processability
3. Lay Flat width 500 mm to 1300 mm...
37 L/D screw: 130 mm
A.C.motor with gearbox
Dynisco pressure unit
screen changer with hydraulic power station
Die face pelletizing unit
Texa heat exchang......
3.5" 24/1 L/D American Kuhne single screw extruder, non vented, air cooled barrel with 30" barrel center line height. 0
Model # AK 350
Driven by a 75 HP, 1780rpm,
AC motor with varia......
-30/1 L/D non vented barrel,
-electrically heated and air cooled.
-Extruder previously mounted on auxiliary base supplying approximately 97" center line height available with the extr......
Model: NRM 30/1 L/D
Non-vented extruder driven by 75 hp DC motor.
Has electrically heated air cooled barrel, includes temperate control panel, has 86 hp rated gear box with 15.23/1 ra......
-Model - DS20 24/1 L/D
-Air cooled non-vented extruder.
-Extruder is driven by a 40 hp DC motor with -Reliance SCR controller. Has base mounted temperature control panel, 17.5/1 gear r......
2.5" Davis Standard Thermatic 24/1 L/D Non-Vented Extruder
- Extruder is belt driven to 50hp Ac Motor with Inverter
- Davis Standard GEARBOX MODEL 25IN25, with 17.26/1 Gear ratio rated ......
1220mm wide Kaufman/Mega sheet line. 115mm extruder, gear pump.
1220mm Mega 3 roll stack haul off
and ashe winder....
30D Vented (Plugged), 115 mm Welex extruder
125 RPM Max Screw Speed
187 KW DC Drive.
Electrically Heated Water Cooled Barrel.
Temp and Drive Panels....
Output Capacity = 40Kg/Hour
Film Thickness = 24 inch
Product made = 15 micron PVC film (can be used as wrappers of chocolate)
Gear Box Ratio/Make = 15-20 ratio
L/D Ratio: 30:1
Production: 75-80 Kg
Product: Sheet plant
Inline Printing: Single Colour
Model H 3518-RH-H
- Gearbox 11:1 Ratio 241 HP rated service factor 1.25 heat exchanger for gearbox with hopper and 3 pc clamp 72" center line height
Email Id Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password must be between 4 and 15 characters long,
and may consist of hyphen (-), underscores (_), dot (.),
and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.