Forgot password?Register for an account?
Email Id Not Valid.
Share This Page
Listing of refurbished single screw extruder, used twin screw plastic extruders, second hand conical screw extruders for pipes, profiles, compounding and other used extrusion plants. For more details contact us on email@example.com
For Sale - Used Plastic Extruders, Twin Screw Extruder, Conical Screw Pipe Extruders
Model: ZSK 133 SC
- Gear box ratio: 7:1
(For details, please see next pages)...
- Screw diameter: 200 mm
- L/D Ratio: 12 with manual operated screen changer
- Without electrical panel & motor
L/D Ratio: 30:1
Gearbox Ratio: 11.34:1
Horsepower: 300 HP DC Motor
Drive: Flexpak 3000
Control: Touch Screen
Extruder Requires Cooling Fans
Screen Changer Not Included
90mm S&B single screw extruder with fan cooled barrel,
Electrically heated. 6 zone control panel.
80 kw dc motor.
2.5" Welex 30/1 L/D vented extruder.
Has electrically heated water cooled barrel, swing gate head, and rotary union fro screw cooling.
Driven by a 60 hp AC motor, 230/460 volt AC input......
2 1/2" Marco Air Cooled Extruder,
30:1 with Control Panel,
75HP Drive and Motor...
Width = 11 foot
Length = 20 foot
Height = 18 foot
Power requirement total = 58 kw
Maximum size . 1150 mm
Load Data:- 37.0 (kw)
AC Drive 30(kW)
Davis Standard BC38 Single screw Extruder
With general purpose screw
Davis Standard vacuum bath approx. 4 meters long
Davis Standard haul off
Gillar STHD 75 Rotary Cutter
Boston Matthews 60mm single screw extruder,
Re-wired and fitted with brand new temperature controllers,
Motor overhauled, screw & barrel checked and replaced if required.
90 mm Welex Extruder With Screen Changer
Water Cooled Barrel
Melt Pump and Control Panel: 70/70
DC Motor with Drive: 150 hp
Max screw speed: 225 rpm...
120mm Kaufman single screw extruder.
33D with 205kw DC motor,
Electrically heated fan water cooled barrel,
Extrex model 56 gear pump with AC motor. Panel
2500 rpm m......
Used 3.5" Sterling low bulk density pelletizing line consisting of the following:
3." Sterling 24/1 L/D ram feed assisted single screw extruder driven by 125 hp DC motor.
53mm Entek 600 rpm co-rotating twin screw extruder,
Has electrically heated liquid cooled barrel,
Driven by a 112 kw AC motor with variable frequency drive.
Has vented 48/1 L/D barr......
Used 2.5" 24/1 L/D Killion non-vented Extruder.
Has electrically heated, air cooled barrel.
Driven by a 40 HP DC motor with SCR controller.
Gearbox ratio 9.3:1.
34" Single Layer Line 2 1/2" NRM Extruder
NRM 2.5” extruder 24:1 air cooled
40 hp dc drive
Manual screen changer
4” die with Western single lip air ring
5” DIE with Future design sin......
Voltage: 380 V 3F + N Hz 50
Engine: alternating current with inverter
Extruder: Plastex 80 mm. 1/30
Filter exchanger: BDO 80 mm.
Head: diam. 300 mm.
Cooling ring: ASR 3 diam.(250-50......
Estimated Shipping Weight : 2 Tons
Height : 6 Feet
Width : 5 Feet
Length : 10 Feet
Quantity Available : 1
Volatge : 440V
Frequency : 50 Hz
Phase : 3
Hours Worked: 200 hr
1) 115 mm (4.5") Welex Single screw extruder
Standard infeed hopper
Circa 250 Hp dc motor
175 rpm max screw speed (ran at 160 rpm)
Extek 150 mm lantern screen chan......
3.5" Welex 30/1 L/D extruder.
Extruder model:- 3.5-30:1LHSV.
Has electrically heated water cooled vented (plugged) barrel including 2-stage screw and spare screw.
Extruder is driven ......
90 mm Amut EA90 single screw extruder.
147 kw dc motor
Fan cooled barrel
BD Plast hydraulic screen changer plus die
Email Id Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password must be between 4 and 15 characters long,
and may consist of hyphen (-), underscores (_), dot (.),
and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.