Forgot password?Register for an account?
Email Id Not Valid.
Share This Page
Listing of refurbished single screw extruder, used twin screw plastic extruders, second hand conical screw extruders for pipes, profiles, compounding and other used extrusion plants. For more details contact us on firstname.lastname@example.org
Required - Used Plastic Extruders, Twin Screw Extruder, Conical Screw Pipe Extruders
We are looking for single screw extruder
Capacity:- 800 to 1200 kgs per hour
Any good Indian make
In good working condition...
We are looking for Extruder
- Capacity: 1000 kg/hrs
- L/D 32 preferred
- Single screw to process PP
- Complete with Gear Box, Motor and it's drive
- Will be used to replace extrude......
We are looking for Single Layer Extruder with the following specifications
- Single Layer Extruder
- Oscillating Dies
- Output: 150 - 200 kgs/hr
- Width: 1000 to 2000 mm
We are looking for single screw extruder machine with the following specifications
- 90 mm & 100 mm screw in second hand
- Budget: INR 2,00,000 to INR 5,00,000
We are looking for Extruder with the following specification
- with venting
- L/D 44:1
- Prefer machines from India
- For Masterbatch Compounding: upto 75% filler loading
- TSE with ......
We are looking for extruder for PS sheet with the following specifications:
- Output: 80 - 100 kg/hr
- Sheet dimension 360 x 0.6 mm
- 3.5 inches or a 4.5 inches plastic extruder capable of extruding nylon 11 or BESHV BLK T, Rilsan PA11
- pipe with a OD of 3.50 inches with a ID of 3 inches @ .5 fpm with the follow......
We are looking for extruder with the following specifications:
- Single screw extruder
- 90 mm diameter barrel and screw
- Electrically heated and cooled
- 5 section barrel
- Extruder machines of flexible plastic straws which could produce 8" inches x 4 mm diameter of straws capacity 20 kg per hour (800 pcs / hour approx.) ...
We are looking for extruders with the following specifications
- 4.5" and 3.5" extruders one each
- Make: Davis standard or its companies
- Air cooled barrel
- Water cooled feed th......
We are looking for plastic extruder with the following specification:
- 90 mm +/- with 150 hp motor
- Good sleeves, screws, gearbox & motor
- No heater
- Functional over form
We are looking for PVC extruder for profiles with the following specification:
- Capacity: 250 to 350 kg/hr
- Size 200 mm to 800 mm
We are looking for Davis Standard Model: 25IN25 or equivalent
- 50 HP Motor with 17.2 : 1 Gear box ratio
- 2.5" Diameter Screw 30:1 L/D
- 6 Heating zones
We are looking for PVC Extruder with following specification:
- Capacity of 5,000 lbs / hour Output of flexible PVC
We are looking for Lab Extruder as follows:
- Barrel diameter: 20 mm
- L/D: 42 to 44
- Motor rating: 7.5 KW
- Screw: 1200 RPM
- Volumetric feeder - 1 no.
- Material to be process: P......
We are looking for an extruder as follows:
Approx. 100 mm screw
- 500-600 mm die
- IBC cooling
- Gusset boards
- 1800 mm wide haul off and take off or above
- Single station winder
We are looking for HM extruder and gusseting machine as follows:
- Width of extruder: 25" to 30"
- With a die of LD for extrusion of LD
- Acceptable age: 5 to 7 years old
- The machin......
We need a 2 screw extruder for PVC granule to produce;
- L/D: between 24 and 28
- Screw diameter: more then 150 mm
- Capacity: More the 1500 kg/h
Email Id Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password must be between 4 and 15 characters long,
and may consist of hyphen (-), underscores (_), dot (.),
and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.