Forgot password?Register for an account?
EmailId Required.
Email Id Not Valid.
Filter
Share This Page
For Sale - Used Plastic Grinders, Used Ganulators and Second Hand Crushers
Grinder:- Model:- AMV 12 Motor:- 1.1 KW(1.5 H.P) Speed:- 1420 RPM Origin:- from Italy For more details:- Sagar Polytechnik Ltd Name:- Raj Kalaria Contact:- +91 9824251219 E......
UM 17856
:- Gujarat, India
20 hp motor. 14" x 16" feed opening. Has blower discharge, operator control panel, 460 volt 3 ph, 60 Hz. Includes edge trim receiver for installation on top of a standard tray fee......
UM 21070
:- USA
Model:- S26/41GES Motor:- 11 kw Length:- 130 cm Width:- 115 cm Height:- 215 cm Weight:- 2 Ton Throat Size:- 43 x 50...
UM 21076
:- Europe
Model:- Cumberland USI 10 X 12 Motor:- 7.5 kW Length:- 95 cm Width:- 155 cm Height:- 185 cm Throat Size:-7 X 10...
UM 21077
Model:- 1- VAZ 1800 T 136 kw Hi Torc drive motor 415v 50 Hz. Rotor diameter 495 mm with 84 of 40 mm x 40 mm fly blades, 41 fix blades for cutting film and 4 fix blades. Hopper with i......
UM 21069
Model:- CK1824 Feed size:- 18"x 24" Rotor:- open Rotating knifes:-3 Bed knife:-2 HP:- 40 Voltage:- 480/360 Blower hp:- 3 Included:- blower & cyclone Granulator options:- main mot......
UM 21061
2 Machines Available Horse power- 50 Cutting chamber- 22” x 24” Rotor knives- 3 Bed knives- 2 Rotor type- Open Offer includes: New set or rotor and bed knives Clean, test and ......
UM 21024
Model:- 3560-U 32 kw motor with blower and cyclone 8 mm screen...
UM 20998
Model:- 62B Dual feed hopper with rear mounted 48" wide paddle infeed, Paddles powered by 3 hp dc motor drive with magnetic top infeed chute....
UM 21005
Model X1000, 1000 mm (40") wide x 600 mm (24") deep grinding chamber, 5 knife open rotor, Feed hopper, 100 hp motor, 12" diameter side bottom discharge, Jack screw closure mec......
UM 20999
Feed opening: 600 x 800 mm Hopper capacity: 0,6 m³ Throughput: Material and screen dependent Rotor diameter (mm): 252 Rotorlength (mm): 600 Rotor speed (rpm): 60 – 100 Power require......
UM 20995
Hopper Opening– 800 x 800 mm Motor Power Kw – 30 Rotor Diameter – 250 mm Rotor Speed – 90 rpm No. of Cutting Units – 36 off Cutter Size – 40 x 40 mm Cutting Width – 820 mm...
UM 20996
Model:- HR102K Hopper Opening:- 1,000 x 1,000 mm Rotor Diameter: 348 mm Rotor Width: 1000 mm Power:- 45 kw Rotor Knives – 50 Screen Size:- 15 mm Push Ram V Spec Rotor...
UM 20997
Driven by a 25 HP 230/460 volt motor, Direct connected in shredder input shaft. Shredder infeed chamber is 18" x 32" with 3/4" blades mounted on a dual rotor design. Shredder is equ......
UM 20951
Includes operator control panel and motor starter. Shredder rotors are direct connected to 100 HP AC motor. Each shredder’s blades approximately 2" thick...
UM 20929
Hopper Size Opening:- 50.5" W x 44.5" Tall Cutting Chamber Size:- 54" W x 23.75" Deep Rotor Knives:- Slanted Rotor Knives Bed Knives:- 2 Screen Size:- 3/8" Throughput (lbs./hr):- 350......
UM 20896
Model 1600H, Feed hopper with integrated hydraulic ram, on base, Hydraulic system with 150 hp and 50 hp hydraulic pumps...
UM 20879
Heavy duty granulator Generally Overhauled & rewired Fitted with sharpened blades Motor Power: 59 kW Throat Opening 600 mm x 1000 mm Screen size 30 mm Output approx. 1.5 tonne per h......
UM 20862
Motor power: 18.5 kW Infeed size: 800 x 1000 mm Ideal for shredding smaller plastics sections...
UM 20857
Motor: 37 kW Screen size 38 mm Infeed size: 1200 x 1200 mm...
UM 20856
Email Id Required.
Subject Required.
Message Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password Required.
Password must be between 4 and 15 characters long, and may consist of hyphen (-), underscores (_), dot (.), and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.
