| Nano fillers are excellent additives that reduce the wear of a plastic end product. Recently, extensive research has been conducted on nanoparticles of traditional fillers in PTFE at 1% dosage. Seal performance can be enhanced by using nanoparticles as fillers for polytetrafluoroethylene-based (PTFE) sealing materials. Trelleborg Sealing Solutions has researched and compared the wear reducing ability of its traditional Turcon® additives to nanoparticles as additives. Trelleborg tested PTFE filled with the following nanoparticles: carbon nanotubes (MWCNT), alpha Aluminum Oxide (Al2O3, alpha), beta Aluminum Oxide (Al2O3, beta), Tin Oxide (SnO2), Copper Oxide (CuO), Zinc Oxide (ZnO) and Iron Oxide (Fe2O3) - in all cases at 1 wt%. Performance was compared to both virgin PTFE and Turcon T05. In these tests, the optimized Turcon additives outperformed the nanoparticles. The Turcon compounds are optimized for service conditions using traditional fillers. Even so, the company will continue to investigate if improvements can be made using nanoparticles. The results demonstrate that different types of nanoparticles have different effects on the wear resistance of PTFE, going from virtually no effect to wear reductions beyond a factor of 50. For some, nanoparticles performance was dependent on whether systems were running dry or lubricated. For instance, MWCNT performed very well when dry-running but poor in lubricated conditions, while others, such as Al2O3 alpha, gave good overall performance. None of the nanoparticle filled materials were capable of outperforming the wear resistance of Turcon T05, dry-running or lubricated. Virgin polytetrafluoroethylene (PTFE) has very low wear resistance and fillers are added to PTFE to increase its wear resistance in dynamic sealing applications. Nanoparticles, which have at least one dimension in the size range of one to 100 nanometers, offer an alternative to traditional fillers. These are currently receiving much attention as fillers for polymers and are promoted as improving mechanical and tribological properties at a low degree of fill as well as reducing the risk of abrasive action against mating counter surfaces. The comparative results are illustrated below:  The results demonstrate that different types of nanoparticles have different effects on the wear resistance of PTFE, going from virtually no effect to wear reductions beyond a factor of 50. For some nanoparticles performance was dependent on whether systems were running dry or lubricated. MWCNT performed very well when dry-running but poor in lubricated conditions while others, such as Al2O3 alpha, gave good overall performance.  None of the nanoparticle filled materials though were capable of out-performing the wear resistance of Turcon® T05 PTFE compound, dry-running or lubricated. |
11-Oct-23
Potřebujete finanční pomoc? Jste podnikatel? Jste v obtížné finanční situaci? Nebo potřebujete peníze, abyste mohli začít svůj vlastní podnik? nebo placení účtů nebo placení za dům, auto? Zájem o online finanční pomoc? Potřebujete důvěryhodný soukromý věřitel s osvědčenými zkušenostmi? Pokud ano, kontaktujte mě e-mailem: Veronikajirikova10@gmail.com whatsapp.....+420704207735
01-Oct-23
Nabízíme nejrychlejší půjčky. Žádat můžete od 30 000 Kč do 500 000 000 Kč. Splátky si můžete naplánovat na několik měsíců nebo až na 30 let. Vaši žádost zpracujeme a schválíme téměř okamžitě. Peníze vyplácíme v den podpisu smlouvy. Vše vyřídíte z domova, aniž byste museli chodit do kanceláře. Pro více informací nás kontaktujte emailem. E-mail: tyrnerjan75@gmail.com
25-Oct-21
Wow, Thanks a lot guys for referring D e nnis ... I contacted him because I had a ba d cre dit sc ore of 490 and he fixed it is a short period of time at an aff ordable rate he raised it to 820 ... I am so happy and thankful for what he did for me... DENNISDFIXER at gm ail. com or +1 9 1 7 7 2 2 6 9 1 3 if you need his servi ces.
29-Aug-21
Earlier this year I had a really bad c r e d I t and also debts hovering around until I got in contact with Dennis Walker, I must say he is really the best I have come across on what he does which was clearing out my debts and raising my score up to 830 from 490..do well to write him if ever in need of such job.. dennisdfixer at g m a i l . c o m
03-Aug-21
Have you been looking for who will get the job done? without excuses or unplanned occurrences? Get in touch with Dennis Walker now, the only genuine one I have come across. If you are needing your score increased, BK removal etc then reach him on dennisdfixer at gmail dot com or nine one seven. Seven two two. Six nine one three..
19-Jan-19
Dear Sir, I am contacting you in regards of the gold business relationship which i would like us to work together to accomplish. Our family are into gold mining and we are direct owner of Alluvial Gold Dust/Gold Bar which We have for sale and we are looking for serious partners/buyers who have interest in punching our, AU GOLD-DUST/BAR and our family are willing to work with you if you are interested in doing business with us. If you can connect us to buyers we are going to pay you good commission per any kilo that your buyer purchase from our seller. We would also like to meet you in person, so we can negotiate and share better ways on how we can finalize the transaction. I am looking forward in reading from you, hope in getting in good relationship with you. MY PRIVATE EMAIL: kofogahanagold@yahoo.com kofogahanagold@yahoo.com kofogahanagold@yahoo.com Sincerely Yours. (For the family). Available at the moment: Commodity: Au Gold Bars Weight:Before And 1kg Bars Origin: Ghana Quantity In Stock: 2 Metric Tons Tranches: Trail Order 1,000kg Type:Au Gold Bars Purity.Finess: Based On 94% Quanlity: 22+ Carat Price: $3,2000 Per Kg Product History: Clean,Clear No Liens And Non-Criminal Origin Subsequent Supply Based On Buyer's Capacity Point Of Assay: Any Oof The Recognised Government Refineries Or As May Be Agreed SUPPLY OF AU GOLD DUST/BAR
19-Sep-17
Inquiry on purchase of Virgin raw materials homo pp HPIG110 and HDPE.