| Thin-walled plastics packaging is used in a wide range of industries including dairy containers like yogurt cups, yellow fats, frozen foods, fruit and vegetables, bakery, ready meals, juices, soup and meats. Recently it has also found application in glass and can replacement for commodities like meat and preserves, which reduces weight and opens up design opportunities. The Thin Wall packaging market is composed of open-top containers and lids that are used in both food and non-food applications. Open-top plastic containers are typically used for frozen or fresh food, paint, adhesives, cosmetics, pharmaceuticals. Some of the developments in materials for this process include: Borealis� BorPure™ random polypropylene (PP) copolymers with improved organoleptics. BorPure™ RJ766MO is intended primarily for transparent injection moulded, thin walled food packaging. Its excellent organoleptic properties mean that it will not impart taste or odour to the packaged product. This is the product of a combination of Borstar� PP polymerization technology and Borealis Nucleation Technology (BNT). Together these technologies produce a material with a tailor-made molecular weight distribution (MWD) and crystalline structure resulting in fast crystallisation and a good balance of stiffness and impact properties. Energy savings are also achieved thanks to the material�s excellent flow characteristics, which enable processing equipment to run at lower temperatures than is possible with many competing materials with sufficient organoleptic properties. With its high melt flow rate of 70, BorPure RJ766MO now brings energy saving advantages to containers with even the thinnest walls. Borealis' material grades provide benefits such as: � increased throughput for converters due to reduced cooling time and high flowability � design freedom for the brand owner to create new, complex packaging shapes � superior stackability through high stiffness and excellent creep properties to reduce supply chain costs and improve efficiency � excellent transparency which lets consumers see through the packaging while providing safe storage and easy opening Borpact SG930MO is perfectly suited for high transparency, deep freeze applications like ice cream packaging, where no compromise must be made between transparency and high impact resistance. It achieves a drop test at -20°C of 2 meters versus 10 cm for standard transparent polypropylene MFR 20 (1.2 mm wall thickness, 700 ml filled). RJ470MO is ideally suited for transparent consumer packaging requiring very good flow. For a 15 g container with wall thickness of 0.38 mm, we can achieve an 11% reduction in cycle time versus an MFR of 45.It also has an excellent combination of mechanical properties, providing high stiffness while maintaining good impact resistance. BJ356MO is a heterophasic polypropylene with excellent flow characteristics for demanding applications and provides a step change in flow and impact balance, meeting the demand for lightweight products with high stiffness. Despite its very good flow, BJ356MO has low taste and odour characteristics and a white based tint. This makes it perfect for portion pack thin wall food containers such as 250 g margarine tubs. SABIC has added grades for thin-wall injection moulding applications with a new impact copolymer, Sabic PP Flowpact FPC 100. This was typically developed for the production of containers for yellow fats and packaging for dairy products such as yoghurts, cream, flavoured milk and cheese spreads. The material contains a state-of-the-art package of processing and antistatic additives. It is distinguished by high flow and high crystallisation speed, which together result in reduced cycle times and potential savings in unit costs at converters, particularly in thin-wall packaging. The energy that can be saved will also have knock-on benefits for related environmental considerations. a new impact copolymer grade. With this, SABIC has two impact copolymers and one homopolymer in its Flowpact range. As with existing grades SABIC® PP FPC55 and SABIC® PP FPH50, the new grade contains a state-of-the-art package of processing and antistatic additives. It is distinguished by high flow and high crystallisation speed, which together result in reduced cycle times for moulders. It also features an excellent balance of impact strength and stiffness. SABIC® PP Flowpact FPC 100 has a melt flow rate (MFR, 230°C, 2.16 kg) of 100 g/10 min, enabling easy production using multicavity moulds running at high speed. Concerning food packaging, the new grade is in compliance with EFSA regulations. NATPET has unveiled high-clarity polypropylenes for thin-walled packaging and injection molded containers. Noticeably increasing demand towards very high clarity packaging articles at reasonable price has led National Petrochemical Industrial Co. (NATPET) to upgrade its range of polypropylene random copolymers to introduced two new grades in its Teldene range, both containing Milliken's Millad NX 8000 latest-generation clarifying agent. They are aimed principally at markets for thin-walled injection molded food and non-food containers, especially in Europe, Turkey, the Middle East, and Asia. As living standards improve in emerging markets, end-users are putting increasing emphasis on aesthetics when buying products such as food storage containers. The new grades cater for this demand. Additional advantage of this grade by virtue of having Millad NX 8000 is that it enables the converters to achieve added benefit of considerable energy and cost savings (value for price) by processing the grade at lower temperatures and cycle times than by similar products in the market. The two new grades, Teldene R25MLT and R40MLT, have melt flow rates of 25 and 40 g/10 min respectively. Mechanical properties are very similar, but Teldene R40MLT, with higher flow, is better suited for complex products and high-speed machines. Parts molded with these grades have excellent optical properties; at a thickness of 1 mm, the Haze value is just 6%, compared with 15-20% in grades containing conventional clarifiers when processed at low temperatures. This is attributed to the highly improved solubility of Millad NX 8000 in PP. Injection molders can therefore make significant energy savings and reduce cycle times (decent cost and time savings), while still obtaining articles with outstanding optical characteristics. Reduced energy consumption also means a lower carbon footprint, an environmental factor of thoughtful significance. Processors using the new grades can reduce ecological Carbon Dioxide generation by 5-8%. Prospects for developments in material are very bright. End users as well as converters in our target markets are very appreciative of the improved aesthetics, cost and time savings, and wider processing window achievable with the new grades. |
11-Oct-23
Potřebujete finanční pomoc? Jste podnikatel? Jste v obtížné finanční situaci? Nebo potřebujete peníze, abyste mohli začít svůj vlastní podnik? nebo placení účtů nebo placení za dům, auto? Zájem o online finanční pomoc? Potřebujete důvěryhodný soukromý věřitel s osvědčenými zkušenostmi? Pokud ano, kontaktujte mě e-mailem: Veronikajirikova10@gmail.com whatsapp.....+420704207735
01-Oct-23
Nabízíme nejrychlejší půjčky. Žádat můžete od 30 000 Kč do 500 000 000 Kč. Splátky si můžete naplánovat na několik měsíců nebo až na 30 let. Vaši žádost zpracujeme a schválíme téměř okamžitě. Peníze vyplácíme v den podpisu smlouvy. Vše vyřídíte z domova, aniž byste museli chodit do kanceláře. Pro více informací nás kontaktujte emailem. E-mail: tyrnerjan75@gmail.com
25-Oct-21
Wow, Thanks a lot guys for referring D e nnis ... I contacted him because I had a ba d cre dit sc ore of 490 and he fixed it is a short period of time at an aff ordable rate he raised it to 820 ... I am so happy and thankful for what he did for me... DENNISDFIXER at gm ail. com or +1 9 1 7 7 2 2 6 9 1 3 if you need his servi ces.
29-Aug-21
Earlier this year I had a really bad c r e d I t and also debts hovering around until I got in contact with Dennis Walker, I must say he is really the best I have come across on what he does which was clearing out my debts and raising my score up to 830 from 490..do well to write him if ever in need of such job.. dennisdfixer at g m a i l . c o m
03-Aug-21
Have you been looking for who will get the job done? without excuses or unplanned occurrences? Get in touch with Dennis Walker now, the only genuine one I have come across. If you are needing your score increased, BK removal etc then reach him on dennisdfixer at gmail dot com or nine one seven. Seven two two. Six nine one three..
19-Jan-19
Dear Sir, I am contacting you in regards of the gold business relationship which i would like us to work together to accomplish. Our family are into gold mining and we are direct owner of Alluvial Gold Dust/Gold Bar which We have for sale and we are looking for serious partners/buyers who have interest in punching our, AU GOLD-DUST/BAR and our family are willing to work with you if you are interested in doing business with us. If you can connect us to buyers we are going to pay you good commission per any kilo that your buyer purchase from our seller. We would also like to meet you in person, so we can negotiate and share better ways on how we can finalize the transaction. I am looking forward in reading from you, hope in getting in good relationship with you. MY PRIVATE EMAIL: kofogahanagold@yahoo.com kofogahanagold@yahoo.com kofogahanagold@yahoo.com Sincerely Yours. (For the family). Available at the moment: Commodity: Au Gold Bars Weight:Before And 1kg Bars Origin: Ghana Quantity In Stock: 2 Metric Tons Tranches: Trail Order 1,000kg Type:Au Gold Bars Purity.Finess: Based On 94% Quanlity: 22+ Carat Price: $3,2000 Per Kg Product History: Clean,Clear No Liens And Non-Criminal Origin Subsequent Supply Based On Buyer's Capacity Point Of Assay: Any Oof The Recognised Government Refineries Or As May Be Agreed SUPPLY OF AU GOLD DUST/BAR
19-Sep-17
Inquiry on purchase of Virgin raw materials homo pp HPIG110 and HDPE.