Technical Papers Plastics
Soaking up crude oil spills with polymer mesh magnetic nanoparticles, hydrocarbon polymer

Soaking up crude oil spills with polymer mesh magnetic nanoparticles, hydrocarbon polymer

Researchers at Texas A&M University have developed a non-toxic sequestering agent - iron oxide nano particles coated in a polymer mesh that can hold up to 10 times their weight in crude oil - a material that can safely soak up leftover oil, not captured using conventional mechanical means. As reported in the ACS Nano scientific journal, the nano particles consist of an iron oxide core surrounded by a shell of polymeric material - a simple poly(acrylic acid)-block-polystyrene that possesses both hydrophilic (poly(acrylic acid)) and hydrophobic (polystyrene) groups. This amphiphilic copolymer interacts with both the aliphatic hydrocarbons and aromatic components present in crude oil. Cross-linking the polymer makes the shell more stable in aqueous environments while maintaining the crude oil loading potential. To simulate an actual oil spill, the Texas A&M team weathered a sample of crude oil to match the conditions of the Deepwater Horizon spill. When the nano particles were dropped in the oil-water mixture, they immediately changed color from light tan to black as they soaked up the oil. When the nano particles were full they floated to the top, making for easy recovery by a conventional magnet, not only from a test vial but also in the ocean. A magnet was held to the side of the vial, nano particles collected at the glass, and the water was poured off, leaving the crude oil behind inside of the particles. Sonication in ethanol releases the oil from the swollen polymer matrix, causing the nano particles to return to a light tan. And although spectroscopic changes were observed after washing, the nano particles absorbed the same amount of oil during a second trial. In other words, the system is completely reusable. The next step will be creating an enhanced version that is biodegradable; as it stands, the existing particles could pose a threat if not collected once they’ve accomplished their duties. According to Karen Wooley, the principal investigator of the work, the project is still in the early stages. “But the fact that [our nano particle system] can capture 10 times its weight in crude oil is such a promising first result that I think they have significant potential," she said.

An experimental product - Enviro-Bond® polymer, demonstrates how polymers are used to control and cleanup oil spills on our oceans. This polymer is a hydrocarbon polymer (oil-based) that contains a porous internal structure. The major components of oil are attracted to this polymer because their nature is quite similar. The polymer attracts and absorbs the oil within its pores, encapsulating it and preventing its release. Once the particles are "full" of oil, they adhere to one another and form a semi-solid mass that can be handled and disposed easier.  Enviro-Bond is ideally suited for water cleanup because it is hydrophobic and its density is lower than the density of water, therefore the polymer particles float at the oil-water interface. The gelled material should be recycled at an automotive service center, should be kept away from heat and open flame.
Even though this polymer absorbs oil, it is not considered a super-absorbing material. Super-absorbers must be capable of absorbing 25 times their weight in liquid in order to be classified as a super-absorber. It is considered a "hydrocarbon stabilizer" instead. Scientists are describing what may be a "complete solution" to cleaning up oil spills -- a superabsorbent material that sops up 40 times its own weight in oil and then can be shipped to an oil refinery and processed to recover the oil. Their article on the material appears in ACS' journal Energy & Fuels. T. C. Mike Chung and Xuepei Yuan note that their solution is a polymer material that transforms an oil spill into a soft, solid oil-containing gel. One pound of the material can recover about 5 gallons of crude oil. The gel is strong enough to be collected and transported. Then, it can be converted to a liquid and refined like regular crude oil. That oil would be worth US$15 when crude oil sells for US$100 a barrel. "Overall, this cost-effective new polyolefin oil-SAP technology shall dramatically reduce the environmental impacts from oil spills and help recover one of our most precious natural resources," the authors said.

  Back to Articles

Previous Article

Next Article

{{comment.Name}} made a post.
{{comment.DateTimeStampDisplay}}

{{comment.Comments}}

COMMENTS

0

There are no comments to display. Be the first one to comment!

*

Email Id Required.

Email Id Not Valid.

*

Mobile Required.

*

Name Required.

*

Please enter Company Name.

*

Please Select Country.

Email ID and Mobile Number are kept private and will not be shown publicly.
*

Message Required.

Click to Change image  Refresh Captcha
W&H Novovflex gearless CI flexo printing press

W&H Novovflex gearless CI flexo printing press