Forgot password?Register for an account?
EmailId Required.
Email Id Not Valid.
Share This Page
Plastics Products, Machines & Materials for Sale
Screw:- 6" L/D Ratio:- 30:1 Zones:- 6 Motor HP:- 300 Style:- Water Ring Pelletizer Screen:- 6" Screen w/ Beringer Separator Type:- Tiner Scale Screen Changer Type:- Prodex Hydrauli......
UM 20620
:- USA
Motor:- 150 HP DC Motor Barrel:- 30:1 Vented Upgrades:- New Interlocked Heat Controllers on Specific Zones, New Screw by Glycon Rebuilt:- Screen Changer Seals Included:- One Auger Con......
UM 20621
Model:- 700HP60-0852 Shot Size:- 60 oz Platen Size:- 53" x 53" Tie Bar Spacing:- 36" x 36" Daylight (Open / Close):- 60" / 16" Clamp Stroke Max:- 44" Ejector Stroke:- 6" Controller......
UM 20623
Motor HP:- 1 Rotating Speed:- 30 RPM Screen:- Screen less Quantity 2 Available...
UM 20625
Horsepower:- 40 HP Opening:- 16 x 20 Motor:- 40 HP Westinghouse Motor Bed Knives:- 2 Knife Open Rotor:- 3 Voltage:- 460V or 240 V Included:- 8" Blower and 8" Cyclone, Spare Set of K......
UM 20626
Voltage:- 460 Volt 3 Phase 60 Hz Cutting Unit Width:- 49.6" Cutting Unit Length:- 26.8" Fuse:- 80 / 100 / 125 A Cutting Disc Diameter:- 12.16"...
UM 20627
Model P-42-60, Horizontal, 14"dia x 42" Rotor with 46 cutters, Stationary knives with 23 notches, 42" x 42" cutting chamber with hydraulic ram feed assist, 42" x 60" (approx) h......
UM 20606
Width 850 mm Line speed - 150 per/ min, Corona treatment , Dyanaspede Tension control all AC drives, un wind with web guide & Dynespede make tension control ,Web guide. Hot air Gen......
UM 20599
:- India
2 screws for PP 125 diameter 40 L / D. extruder with electrical panel 2 degasser and Forced Feeding. It has 2 motors, one 250 kW Mounted and the other 380 kW. It also has 2 spare s......
UM 20603
:- Colombia
Model WL4S, Has 600 mm (23.6") x 800 mm (31.4") feed opening with 600 mm (23.4") wide rotor. Hopper opening is 36" x 48". Driven by a 30 hp 460 volt, 3 phase, 60 hz, motor, 110 rpm.......
UM 20592
Unwinding Unit Max width 1100 mm Min/Max Bag Length 250/1.500 mm Max roll diameter 120 mm Roll tracks 2 Slit an seal unit...
UM 20580
:- Europe
Model 192. Will accommodate maximum 30" diameter rolls, Has Phantum Axis design including nip rolls and slitting station with (4) knife holders. Has auto cut, dancer for speed contr......
UM 20576
Model: ISGT950WV10-81M Shot Size: 142 oz. Tie Bar Spacing: 49.8" x 49.8" Platen Size: 68.3" x 68.3" Daylight: 88.5" Clamp Stroke: 69" Mold Thickness: 19.7"/43.3" Equipped with:- ......
UM 20574
Model:- MV 80 Shot Size:- 4.44 oz Max Daylight:- 22" Min Daylight:- 7.5" Tie Bar Spacing:- C-Frame Clamp Stroke:- 14.5" Motor Horsepower:- 20-30 hp Power Requirement:- 460V Equi......
UM 20573
Working Width 1600 mm Die and Punch Gap: 2.2 m Layer Ratio: 1:1:1 Screw Size: 55 mm Screw Length: 94 inches Gearbox Speed Ratio: 12.5/1 Machine Output: 180-200 Kg's/hour(Depending ......
UM 20550
Rotor:- 3 Knife High Shear Rotor Bed Knives:- 2 Motor:- 100 HP Weg Control Panel:- Included Screen:- 3/8" No Feed Hopper or Air Discharge Chute...
UM 20546
Cutter:- Newly Replaced 2020, 30k Voltage:- 480 Volt, 3 Phase, 60 Hz Drive:- Hydraulic Horsepower:- 100 HP Discharge Height:- 43" Hopper Opening:- 60" x 54" No of Motors:- 2 Stand ......
UM 20545
Model: - 5000-h-1. 1. PLC:- ultra-cpu 03(dop-107cv) 2. Mould thickness :- 260 mm 3. Mould opening:- 300 mm 4. Maximum mould width:- 320 mm 5. Maximum mould height:- 450 mm 6. C......
UM 20495
Melt capacity 200 Kg/ Hr, plant working width 900 mm Operation speed 280 Mtr/ min. 1) 75 mm Extruder a) Screw 75 mm with L/D ratio 32:1 b) Barrel suitable for above screw; with th......
UM 20510
Type/Style:- Form, Cut, Stack, Pick and place Max Forming Area:- 825 mm x 675 mm Min Forming Area:- 480 mm x 385 mm Tool Dimension:- 850 mm (max width) x 700mm (max length) Max Top/Bo......
UM 20537
Email Id Required.
Subject Required.
Message Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.
