Forgot password?Register for an account?
EmailId Required.
Email Id Not Valid.
Filter
Share This Page
For Sale - Used Plastic Grinders, Used Ganulators and Second Hand Crushers
One (1) used Battenfeld caterpiller dual belt puller saw combination Model: DESC125R - 5" wide x 70" long contact dual belt puller section - With saw attachment (For images, please ......
UM 7381
:-
Model: LP-400 - Feed throat opening top: 16" x 18" - Feed throat opening front: 8" x 15 1/2 - Cutting chamber: 10" x 15" - Cutting circle: 8" - Average through put: 250-500 lb per ho......
UM 2842
:- USA
Used 72" Wysong - Model: 1472P shear - Was in production cutting 0.250" ABS (For images, please see next pages) ...
UM 7118
- Has 34" stroke - Includes hydraulic pumping system - Includes feed conveyor with work height of approximately 36" (For images, please see next pages) ...
UM 6947
Model: 4590 - Nip Roll Infeed 1997. - 900 X 450 mm Throat - Soundproofed. - Motorised Nip Infeed. - Circa 45 KW Motor - Panel...
UM 6940
:- UK
Model: B50 - Hopper opening 3000 mm x 700 mm - 75 kw motor - New screens fitted. - They are in two halves 10 mm in size, but other sizes are available if required. - A lot of m......
UM 6923
:- United Kingdom
- In-feed: Tray feed - Cutting chamber: 14" x 16" - Rotor: 3 Knife open chevron cut - Bed knives: D2 - Screen: 5/16" Diameter - Base: Casters - Discharge: Internal blower w/6" outl......
UM 6802
Model # MS 1500 - 1500 mm x 1500 mm throat - The motor is 575 volt, 60 hertz, 3 phase, 75 hp Canadian voltage. - 10 hp hydraulic power pack - Hydraulic ram - (2) stationary blades lo......
UM 6523
:- Canada
- 18" x 28" hopper opening - (6) rotating blades - (4) stationary blades - 75 hp, 575 volt motor - 5 hp blower/cyclone & gaylord stand - Infeed conveyor - Hydraulic gaylord dumper ......
UM 6527
- 15" x 34" feed throat opening - 20" x 35" hopper opening - (3) rotating blades - (2) stationary blades - Solid rotor - 3/8" Screen - 100 hp, 575 volt motor - 5 hp blower/cyclone ......
UM 6526
Used Previero model PR-812 film shredder. - Has 33" x 49" feed opening, hydraulically driven by a 126 kw hydraulic pumping system. - Includes operator control panel with automatic rever......
UM 2288
(1) used Weima slow speed shredder, model WLH600S/45 Leopard, carbon steel. - Approximately 368 mm (14.4" diameter) x 24" wide (32) bolt on blade v rotor, driven by a 45 KW (60 hp), 3/60/......
UM 4486
Model: 13CSD - Belt driven by 125 HP 460 volt motor - Has panel coil jacket on chamber - 15" X 18" feed throat - Blower discharge including blower - Has multiple spare screens inc......
UM 6148
(2) used Ball and Jewel granulator - Feed opening: 36" x 52" - Dual 100 hp - 460 volt motors - Belt driven with cyclone and infeed conveyor - Includes control panels (For images,......
UM 3477
- In feed: Conveyor feed - Cutting chamber: 16" x 20" - Rotor: 2 Knife open - Bed Knives: D2 - Screen: 5 / 16" diameter - Base: On Casters - Discharge: Bin - Motor: 20 HP 460 V - ......
UM 6013
- In-feed: Conveyor feed with pneumatic assist - Cutting chamber: 16" x 20" - Rotor: 3 Knife open - Bed knives: D2 - Screen: 1 / 2" diameter with pneumatic assist screen cradle - Bas......
UM 6012
- In-feed: Tray Feed - Cutting chamber: 15" x 24" - Rotor: 3 knife steep Angle - Bed knives: D2 - Screen: 3 / 8" Diameter - Base: Step - Discharge: 6" Airveyor - Motor: 50 HP 460 ......
UM 5902
Model: SK282401 - 16" X 24" Granulator - Has sound enclosed chamber and hopper - Driven By 50 Hp 480 volt motor - Has 3 knife open rotor - Operator control panel including start......
UM 5252
- 250 mm x 300 mm Cumberland 2/84 edge trims granulator. - 3 rotor knives, - 2 dead knives. - 7 mm screen. - 5.6kw ac motor. - Powered nip rolls. (For images, please see next......
UM 5579
Model: S45 Foremost Granulator - 16" x 45" feed opening - 3 knife closed rotor - 2 bed knives - Feed hopper with dual 50 HP 230/460 volt motors with 20 HP blower discharge (For pi......
UM 4689
Email Id Required.
Subject Required.
Message Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Pioneer Manufacturing Corporation
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password Required.
Password must be between 4 and 15 characters long, and may consist of hyphen (-), underscores (_), dot (.), and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.
