Technical Papers Plastics
What has caused oil prices to swing over the past five decades?

What has caused oil prices to swing over the past five decades?

Techno - commercial information on plastics Industry - News on Plastics Industry - Plastemart.com
 
Oil Prices - Information; Plastemart.com
What has caused oil prices to swing over the past five decades?
 
 

Oil prices have tremendous impact on the global economy. Any major shift in price and availability of oil has a direct bearing on economic growth and cost of living.
The World has seen several changes in oil prices from 1973-2005.
1973 was the first milestone in the history of oil prices, when OPEC began to assert power; commenced the nationalization process and raised prices in response to the falling US dollar. Then, the largest oil producer Saudi Arabia, along with other oil producers, set up an embargo of oil to USA and other developed countries. This triggered a price increase, catapulting prices from less than US$3/barrel to US$12/barrel and higher. Prices did not subside even after the embargo was lifted in mid-1974, because the OPEC countries decided to restrict production according to demand in order to sustain oil prices.

In fact, oil prices remained range bound between 1974 and 1978. They started shooting up again only from 1978 onwards, when the Shah of Iran was deposed and Iran saw a revolution take place. Oil prices went through the roof to reach levels of US$38-40/barrel by 1982. However, prices started sliding to levels as low as US$27-28/barrel around 1984, remaining practically stagnant in a narrow range between US$26-28/barrel until 1986.

Saudi Arabia's decision to stop acting as swing producer in 1986, led to a sudden price collapse. Prices collapsed to almost US$13-15/barrel in a very short time. Prices remained below US$20/barrel until the Gulf War in early 1991, when it shot up to about US$32/barrel. However, at the end of the war in 1991, prices tumbled once again below US$20/barrel and reached as low as US$12/barrel.

A financial crisis in Asian countries in 1997, that led to an oil oversupply, was the next influence on price changes. However, after the revival of economy in Asian region in early 1999, there has been a steady increase in the demand of oil due to overall global economic growth. Another blip was sounded when terrorists attacked New York in September 2001, and prices collapsed to below US$20/barrel. The overall economic growth, however did not permit them to remain lower for a long period. From 2003 onwards, oil prices continue to rise from the level of US$30/barrel.

The buoyant economic scenario and restricted supply by all the oil producing countries have led to very high prices, reaching almost US$38-40/barrel in 2004. The present price increase is even higher and hovers beyond US$60/barrel. No respite is expected at least until there is a reversal of an economic growth.

An interesting aspect of the history of oil price over the last 5 decades is that it reached the highest level of US$72-73 in 1982, just at the commencement of the Iran-Iraq war. Interestingly, if one analyzes the price in the constant US$ term, we get an entirely different picture. At the constant, price of oil was about US$32/barrel in January 1974 compared to US$34/barrel in December 2004- indicating very low disparity. No wonder the oil producing countries are not in mood to reduce prices. If the economy continues to grow robustly, it may not be very surprising to see the prices spike up to even US$75/barrel.


 
 
 
  Back to Articles
ENG. N. BILAL BASHA made a post.
20-Nov-23

Dear Sir, Good day Please share the additive details to avoid odor/smell issues with the Water and beverage HDPE caps/closures

I.S. made a post.
05-May-23

What is the name of the new polymeric stripping agent from BYK-Chemie to help reduce odors in PP bottles?

victor nash made a post.
22-Jan-23

I need a product to remove bad odors/smells from pelletized Poly prop when used on injection moulding machines

Anil made a post.
18-Sep-22

I wish to buy the product

Vikas jain made a post.
17-Mar-22

Hello we are manufacturer of recycled plastic granuals and want to remove smell from my product

Mukesh mukul made a post.
02-Dec-21

Respected sir/madam I need chemical to remove the odor of recycle polymer ( L D P E / H D P E)after processing. Thanks

VISHAL made a post.
10-Sep-21

We Want To Neuatralize The Bad Odour Of Recycled Lubricating Oil, To Odourless Let Me Know If You Can Assits In Solving This Problem.

Jaisingh made a post.
11-Jun-21

To remove bad smell from reprocessed milky PP granules

Võ Th? Trúc Nang made a post.
16-Apr-21

tôi đang sản xuất găng tay cao su tự nhiên và muốn tìm phụ gia để loại bỏ mùi cao su

03-Apr-21

Hi we are manufacture of reclaim rubber EPDM sheets from scrap type we need some additives to control odour while process if you have solution please contact me.

Bharat Maggu made a post.
01-Oct-20

For odour absorbing additive Mail us shinewax@gmail.com Call us at 09910969558

Bharat Maggu made a post.
01-Oct-20

shinewax@gmail.com

Mostafa Gawad made a post.
17-Aug-20

Hi, We are recycling HDPE from oil canisters we are looking for additives that can absorb the oil smell.

Swaroop Palde made a post.
23-Jul-20

Hi we are manufacture of reclaim rubber sheets from scrap type we need some additives to control odour while process if you have solution please contact us

Gopaljee Karn made a post.
26-Feb-20

Sir, We needs all types foul smell remover products for plastics and food application.pl send details.

ASHOK KUMAR made a post.
11-Jan-20

We are making pvc granules from ICW cables, Main complaint from buyer is about odor.. Do you have a dedicated product for PVC? Its really helpful for us if your chemical solve our problem.. pls contact me if you have any product for our pupose. thanks

bagus pangaribowo made a post.
18-Oct-19

We 're pallet plastic manufacturer from 100% recycle plastic (HDPE, LDPE & PP) in Indonesia Odor/ smell on our raw material or even after becoming a finished product is our main problem. Could you please send the detail TDS or MSDS and also price quotation about your product? I' m very interesting to know more about your product Thank You

arpit saxena made a post.
16-Sep-19

Hi, We are an compounding industry and we are doing compounding specially in polypropylene, we are using reprocess material too. So we need ur support to solve the odour issue from our product. our limitation is to follow the EU regulation for the material, so as per mentioned above if it can solve the issue then please suggest.

Maulik Vasoya made a post.
15-May-19

Hello, Could kindly send me more information about the product to my email. I am interested in buying it.

Manish agarwal made a post.
04-May-19

Odours removing chemicals for Polypropylene granules l iam looking to buy it in Mumbai so please suggest something

Vishwajit singh made a post.
08-Feb-19

Hi, I’m looking for odour remover chemical, which can remove the odour from recycling Polymer. Regards Vishwajit Singh Mob.- 7674895320

azam made a post.
07-Feb-19

Do you have a dedicated product for PVC? odorless or odor absorbed in Wire and Cable Industries. Please introduce me if you know other companies with these conditions. thanks

Jovana made a post.
20-Dec-18

I am very interested for this product.

Tami made a post.
04-Apr-18

I am a plastic industry MD

Yogesh Jain made a post.
23-Feb-18

I m interested to buy material

COMMENTS

0

*

Email Id Required.

Email Id Not Valid.

*

Mobile Required.

*

Name Required.

*

Please enter Company Name.

*

Please Select Country.

Email ID and Mobile Number are kept private and will not be shown publicly.
*

Message Required.

Click to Change image  Refresh Captcha
EPS block moulding, thermocole plant

EPS block moulding, thermocole plant