Technical Papers Plastics
Erratic recovery of Europe’s plastics industry in 2011, volumes lost from 2007 yet to be regained

Erratic recovery of Europe’s plastics industry in 2011, volumes lost from 2007 yet to be regained

2010 saw a recovery in demand for most thermoplastics, after two of the worst years the European plastics Industry has seen since the oil shocks of the 1970s. According to AMI, after a drop in demand of over 15% over the period of the recession, volume demand showed a modest 4% recovery in 2010 bringing total demand to just over 37 mln tons. The market has been driven by a strong recovery in German-speaking Europe and by a reversal in the fortunes of the automotive industry, which had been one of the sectors hardest hit by the downturn. This was evidenced by a sharp bounce back in demand for engineering polymers which had tended to see the highest percentage drops in demand. While most sectors reported continuing growth in H1-2011, by mid-year signs of a slowdown were beginning to emerge and full year is expected to pan out at about half the rate achieved in 2010 and only slightly ahead of GDP. The recovery has in general been erratic and patchy and means that overall the European market still has some way to go to regain all the volumes lost from the 2007 peak when the market reached over 41 mln tons. The recovery in demand over the past two years has also at times been challenged by issues around availability of raw materials and pricing volatility. In addition to polymer prices rising on an almost constant basis from December 2009 through to June 2011, because of increasing feedstock costs, converters have also had to contend with record high prices and severe shortages for a whole range of pigments and additive materials used in plastic products. The European plastics industry operates as part of a global industry which is heavily influenced by buying patterns around the world. Booming demand in Asia, particularly in China, but also in Russia and India, sucked raw materials away from European markets. Supply was further constrained by delays in new polymer capacity coming on stream in the Middle East and cutbacks in capacity within Europe, various plant outages caused by feedstock shortages and strikes (in France) which all contributed to periods of tight supply through 2010 for various materials but particularly grades of LDPE, PP and polystyrene. While certain applications regained nearly all the volumes lost through the effects of the destocking and low consumer confidence seen in 2009, others are witnessing more fundamental structural changes which have impacted their demand trends. Trends in light weighting, recycling, environmental and sustainability issues continue to challenge plastics usage in a variety of applications, but particularly in packaging. PET, for example, is seeing much slower growth now even though there are still lots of developments in new markets and applications e.g. in beer and wine packaging, because of growing availability of recycled PET, constant drives to reduce bottle weights and changing consumer drinking patterns. The recession and its recovery has also brought about a reversal in fortunes for some countries. Whereas a few years ago Germany was seen as a mature, slow growing market with its plastics processing industry moving into Central Europe, the strength of its manufacturing industry and economy is now the engine for growth in Western and Central Europe. The bright prospects expected for Europe's Southern countries, Spain, Portugal, Italy and Greece, have now all faded away in the face of bursting asset bubbles and massive government deficits. Growth in plastics processing in these markets, if there is to be any, will mainly be driven by manufacturing exports as local building and consumer markets remain weak.
Another impact of the downturn has been a shrinking in per capita demand of thermoplastics (based on plastics conversion, rather than the demand for plastic goods). Per capita use of polymer in 2011 stands at just short of 74kg/head compared with over 82kg/head in 2007. As would be expected levels are generally higher in Western Europe than in Central Europe, although countries such as the Czech and Slovak Republics, Slovenia and Hungary are now higher than many West European countries highlighting the shift eastwards of polymer consumption. UK now has the lowest level of per capita demand for thermoplastics in Western Europe highlighting the decline in plastics processing that has occurred there over the past decade. The Benelux region continues to have the largest per capita consumption largely because of the presence of some major export-oriented processors in plastics film, fibre, compounds and masterbatch.

For 2011, AMI expects that polymer demand growth will stay slightly ahead of GDP growth at just over 2% bolstered by the stronger demand achieved during the first half of the year to counteract the weakening sentiment in the second half of the year. The growing maturity of the plastics processing industry in Europe means that future growth will increasingly be pegged to GDP. After experiencing difficult times during the downturn, petrochemical producers are now focusing on attaining both economies of scale and geographic expansion to gain a competitive advantage. The petrochemicals industry has entered a transitional phase after the global economic slowdown in 2008-2009 severally affected the growth of the industry. As per GlobalData, petrochem producers are seeking to create a presence in demand-rich geographies and are diversifying their portfolios to achieve higher growth rates. This has led to an increase in the number of partnership between companies of different regions. Since European and North American producers are grappling with declining demand, they are setting up joint ventures with Asian or Middle Eastern companies to sustain their profit margin. In the recent past, the majority of joint venture deals have happened in the Middle East and Asia Pacific. The growing Chinese demand provides opportunities for producers from other regions to utilize this demand by setting up joint ventures with Chinese companies. The Middle East has also become an important destination for petrochemicals production. The Middle East governments provide subsidies on the feedstocks used for petrochemicals production which makes production significantly cheaper compared to other regions. This has made it difficult for producers in other regions to compete. To deal with this situation, companies from other regions are increasingly partnering with the Middle East companies to gain a cost advantage. Joint ventures in these two regions are expected to increase in the next five years as many of the planned projects in these regions are established under joint ventures.
 
  Back to Articles

Previous Article

Next Article

{{comment.Name}} made a post.
{{comment.DateTimeStampDisplay}}

{{comment.Comments}}

COMMENTS

0

There are no comments to display. Be the first one to comment!

*

Name Required.

*

Email Id Required.

Email Id Not Valid.

*

Mobile Required.

Email ID and Mobile Number are kept private and will not be shown publicly.
*

Message Required.

Click to Change image  Refresh Captcha
Lohia tape stretching line

Lohia tape stretching line

recycle-plastic

plastic-road

recycle-plastic-bags