Forgot password?Register for an account?
EmailId Required.
Email Id Not Valid.
Filter
Share This Page
Listing of used plastic compounding line, extruders for masterbatch production, twin screw extruders for compounding PVC, PP, ABS. LLDPE and other engineering polymers
For Sale - Used Plastic Compounding Line, Equipment and Twin Screw Extruders
Max. 300/600 kg/hr Org/ Inorg. Pigments. APV MP 2065 ( Ø 65 mm x 25 D) Yr 92 . 56 kW D.C Motor, Max Screws speed 500 rpm , 8 Barrel Blocks , 10 temperature zones , Die wi......
UM 17108
:- Europe
Max 150/300 kg/h. Org/ Inorg. Pigments. Maris TM-58-V ( Ø 58 mm x 32 D). 48 kW D.C Motor, Max Screws speed 300 rpm , 6 Barrel Blocks , 9 temperature zones , Die with ......
UM 17106
Max 200/400 kG/H. Org/ Inorg. Pigment APV MP 2050 , Ø 50 mm x 30 D . 40 kW D.C Motor, Max Screws speed 500 rpm , 7 Barrel Blocks , 12 temperature zones , Die with 8 h......
UM 17105
Max. 350/600 kG/H. Farrel CPM 500 , 2 Steep system . Counter rotating Compounding 2 rotors , Diam 4 " , 500 rpm , 75 kW DC Motor. Discharge Extruder Single screw Diam 6 " , ......
UM 17109
Max 180/350 kG/H. Org/ Inorg. Pigments. Werner Pfleiderer Coperion ZSK ( Ø 53 mm x 40 D) . 36 kW D.C Motor, Max Screws speed 300 rpm , 12 Barrel Blocks , 7 temperature zon......
UM 17107
We are looking for:- 1. Micro compounder (It should be single or twin screw extruder of lab scale) 2. Pilot scale twin screw extruder for compounding (~10 kg/hr). ...
UM 16998
:- Uttar Pradesh
- Capacity 1.8 tons / hr - Pre-Alpina compounder and Gamma Mechanical pelletizer and wet face cutter. - Cincinnati Milacron compounder with Gamma Mechanical pelletizer and wet face cut......
UM 12620
:- UK
PVC, SBS rubber, SBR rubber, possible formulas with high fillers % as (ChalK, silica) - Banbury mixer Werner & Pfleiderer - 100 liter - Bersttof extruder - 500 kg/hour production -......
UM 12489
:- Spain
We have 2 WP Extruder lines, Model 170, 6-7 ton/ hour, with UG 300 underwater cutting. ...
UM 12376
:- California, USA
Omega 60 mm co-rotating twin screw extruder L/D 40 with Zambellow Gear Box 150 KW/500 RPM main drive (Yr 2009) - Gravimetric feeder - 2 Nos (AND Japan) - Liquid dosing injection pump (F......
UM 12077
:- Kolkata, India
- Farrel size 4LMSD continuous mixer. Modified top feed, side discharge. Oil heated, over-under rotor design. - Driven by a 150 hp, 500 volt, 1750 rpm DC motor thru a Lufkin model S64......
UM 12229
:- Turkey
- Model/Type:PRK/E 140, - Output 750Kg/Hr - Gear Unit,Type:G.45, Hub in mm: 20, Untersetzung:1:11:4, - Force Feeder, 1 Set with Gear box & Motor - Force Feeder Motor, EG 125 DC Moto......
UM 12251
:- Daman, India
- 160 MM Werner & Pfleiderer Twin Screw Extruder with 17/1 L/D (6 barrel sections) - Extruder is driven by approximately a 400 KW main drive, has electrically heated water cooled barrel,......
UM 10345
:-
Model: ZSE170/250 - Package consists of ZSE170 roller extruder equipped with Model SW170 crammer feeder, planetary roller extruder Model ZSE170 and hot melt discharge extruder 250 mm. ......
UM 10346
:- USA
- (1) used Cincinnati Milacron PVC compounding line consisting of the following - (1) Dosing feeder with variable speed control - (1) Cincinnati Milacron twin screw conical extruder Mo......
UM 9528
- PE, PP, PS, ABS, venting, co-rotation, - Melt pressure sensor - Melt temperature sensor - Segmented Screws and Cylinder - Electrical heated (total 38 KW) - Water cooled - Screw di......
UM 9073
1) Korean Ribbon Mixer - 1600 liter jacket type for mixing and drying 2) Swiss Buss Kneader - 100 mm - Capacity: 400-500 kg/hr - 12:1 - Compactor: 1 ea - Motor: 15......
UM 8126
:- South Korea
- Type: QTS 1000 - Range: Profiles and sheets max. 1000 x 110 mm - Note: V = 4 m/min, incl. Length measuring device (For images, please see next pages)...
UM 8017
Line consists of: - 34 mm Leistritz co rotating twin screw extruder with 27/1 l/d ratio - Driven by 11 KW (15 hp) variable speed motor supplying max 390 rpm screw speed. - New 1989 Mod......
UM 7980
- Model: ZSK58GB - New 1989 but equipped with 3.4/1 gearbox new 2006. - Gearbox has "super" torque rating supplying 960 newton meters torque rating. - Gearbox supplies 438 rpm at 17......
UM 6285
Email Id Required.
Subject Required.
Message Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Steer Engineering Pvt. Ltd.
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password Required.
Password must be between 4 and 15 characters long, and may consist of hyphen (-), underscores (_), dot (.), and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.
