Forgot password?Register for an account?
EmailId Required.
Email Id Not Valid.
Filter
Share This Page
For Sale - Used Plastic Grinders, Used Ganulators and Second Hand Crushers
37 kw motor. Fan, cyclone and bag stand...
UM 20504
:- Europe
Not soundproofed. 30 hp motor. 3 fly blades and 2 dead....
UM 20503
Bausano counter-rotating twin-screw extruder Hopper with mixer 2×140 3RL / K model 2.800 mm long screws (20 L/D) BD-Plast BDO oil-hydraulic filter changer 140.200 With hydraulic pack ......
UM 20265
Rotor Length 1300 Rotor Diameter 500 Motor Power 90 KW...
UM 20263
Feed Size:- 12"x17" Motor HP 23 Rotor RPM:- 240 Rotor:- Open Rotor Blades:- 6 Blades (Three rows of two) Voltage:- 460/3/60 Screen Size:- 8 mm...
UM 20254
:- USA
Model ZTLL 1200 x 1600. Carbon Steel. Feed opening is 47" (1200mm) wide x 68" (1600 mm) long. Has approximate 15" (380 mm) rotor flight circle with 22 cutting inserts. Rotor driven ......
UM 20144
Rotor has bolt-on cutting inserts. Driven by 50 HP motor. Includes hopper, horizontal hydraulic feed ram with power pack, and screen....
UM 20145
Feed throat opening 32" X 39". Driven by a 19.6 kw (25 hp) 208/220/380/480 Volt motor. Has 1/2" diameter screen and approximately 6" X 36" screw conveyor which discharges into 8" wide......
UM 20143
Granulator includes 3 knife rotor, 45 Deg. inclined infeed hopper, Rubber to metal feed rolls, Belt driven 10 hp main motor 230/460 volt, 1170 rpm and operator controls. Include......
UM 19986
Model 1256, Belt driven by 30 hp motor, and includes paddle blade feed assist, Air cylinder chamber tilt, blower discharge cyclone & frame, spare blades and discharge dust collection ......
UM 19987
Includes infeed paddle wheel assist, 10 hp rotor motor and 1 HP pull roll motor. Designed for blower discharge but no blower included. Granulator is mounted on casters....
UM 19988
Type TA7085DHS. Gearbox 36" x 34" feed, 2493 hours 35 hp 460 volt, 60 hz, 90 rpm motor....
UM 19974
Horsepower:- 20 Feed Opening:- 16" x 20" Blades:- 3 Bed, 2 Rotar Rotor:- Open Screen Size:- 5/16" RPM:- 1760 Volts:- 230/460...
UM 19766
Horsepower: 25 HP Feed Opening Dims.: 14" x 18" Number of Rotating Knives: 3 Blade Throughput Capacity: 400 lbs / hr Rotor Configuration: Open Side Profile Feed Opening Option: 8" x ......
UM 19965
Horsepower:- 3/4 Feed Opening:- 16" x 18" Cutting Chamber:- 8'' x 10'' FLA 1.9 Voltage:- 460/3/60...
UM 19767
Cutting Chamber:- 16"x20" Motor HP:- 25 Throughput:- 900 lbs/hr Rotor Knifes:- 3 Knife Open w/ rotating end discs Discharge:- 6" RPM 1740 Voltage:- 460/3/60...
UM 19765
Cutting Chamber:- 9.5" x 12" Knives:- 3 Rotor:- Open HP:- 5...
UM 19764
Max. HP:- 15 HP Opening (HxW):- 12.4" x 16" Rotor:- 3 Blade Open Rotor Voltage:- 230/3/60 Control Circuit:- 120 Total Amps:- 39 AMP...
UM 19763
HP:- 7.5 HP Front Feed Opening:- 10" x 12" Rotor:- Open Blades:- 3 Phase:- 3 HZ:- 60 Volts:- 230/460...
UM 19762
Model AB-40 400 x 300 mm hopper opening N.3 rotating blades and No. 2 fixed counter-blades Blade length 400 mm Three-phase motor 7.5 kW 250 mm rotor diameter Grid with 8 mm holes S......
UM 17705
Email Id Required.
Subject Required.
Message Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Pioneer Manufacturing Corporation
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password Required.
Password must be between 4 and 15 characters long, and may consist of hyphen (-), underscores (_), dot (.), and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.