Forgot password?Register for an account?
EmailId Required.
Email Id Not Valid.
Filter
Share This Page
For Sale - Used Plastic Grinders, Used Ganulators and Second Hand Crushers
Model: 50H-XRIII - 200 HP Raised BED knife - Hog granulator with 26" x 50" feed throat opening. - Granulator is belt driven to 200 hp, 460 volt, 1185 rpm motor which includes reduced ......
UM 8033
:- USA
Model: 50B - 75 KW AC motor - Throat 1270 mm x 510 mm - Potential throughput over 1000 kg/hr. - Sheet nip feed (For images, please see next pages)...
UM 7971
:- UK
Used Rotogran 22" x 24" 50 hp granulator, - Includes blower for pneumatic discharge but no cyclone. - Open rotor design with 6 fly and 4 bed blades. - Unit completely reconditioned ......
UM 5254
- Infeed: Insulated Tray Feed - Cutting chamber: 12" x 29.5" - Rotor: 2 Knife Open - Bed knives: D2 - Screen: 5/16" Diameter - Base: Casters - Discharge: 1.5 HP Rear Mount Blower w/......
UM 7718
One (1) used Cumberland Granulator Model: 50H, 20" x 50" feed opening - 18 blade solid helical rotor - With feed hopper - 200 hp - 440 volt - 1185 rpm motor - With 48" wide x 23' l......
UM 7570
One (1) used Battenfeld caterpiller dual belt puller saw combination Model: DESC125R - 5" wide x 70" long contact dual belt puller section - With saw attachment (For images, please ......
UM 7381
:-
Model: LP-400 - Feed throat opening top: 16" x 18" - Feed throat opening front: 8" x 15 1/2 - Cutting chamber: 10" x 15" - Cutting circle: 8" - Average through put: 250-500 lb per ho......
UM 2842
Used 72" Wysong - Model: 1472P shear - Was in production cutting 0.250" ABS (For images, please see next pages) ...
UM 7118
- Has 34" stroke - Includes hydraulic pumping system - Includes feed conveyor with work height of approximately 36" (For images, please see next pages) ...
UM 6947
Model: 4590 - Nip Roll Infeed 1997. - 900 X 450 mm Throat - Soundproofed. - Motorised Nip Infeed. - Circa 45 KW Motor - Panel...
UM 6940
Model: B50 - Hopper opening 3000 mm x 700 mm - 75 kw motor - New screens fitted. - They are in two halves 10 mm in size, but other sizes are available if required. - A lot of m......
UM 6923
:- United Kingdom
- In-feed: Tray feed - Cutting chamber: 14" x 16" - Rotor: 3 Knife open chevron cut - Bed knives: D2 - Screen: 5/16" Diameter - Base: Casters - Discharge: Internal blower w/6" outl......
UM 6802
Model # MS 1500 - 1500 mm x 1500 mm throat - The motor is 575 volt, 60 hertz, 3 phase, 75 hp Canadian voltage. - 10 hp hydraulic power pack - Hydraulic ram - (2) stationary blades lo......
UM 6523
:- Canada
- 18" x 28" hopper opening - (6) rotating blades - (4) stationary blades - 75 hp, 575 volt motor - 5 hp blower/cyclone & gaylord stand - Infeed conveyor - Hydraulic gaylord dumper ......
UM 6527
- 15" x 34" feed throat opening - 20" x 35" hopper opening - (3) rotating blades - (2) stationary blades - Solid rotor - 3/8" Screen - 100 hp, 575 volt motor - 5 hp blower/cyclone ......
UM 6526
Used Previero model PR-812 film shredder. - Has 33" x 49" feed opening, hydraulically driven by a 126 kw hydraulic pumping system. - Includes operator control panel with automatic rever......
UM 2288
(1) used Weima slow speed shredder, model WLH600S/45 Leopard, carbon steel. - Approximately 368 mm (14.4" diameter) x 24" wide (32) bolt on blade v rotor, driven by a 45 KW (60 hp), 3/60/......
UM 4486
Model: 13CSD - Belt driven by 125 HP 460 volt motor - Has panel coil jacket on chamber - 15" X 18" feed throat - Blower discharge including blower - Has multiple spare screens inc......
UM 6148
(2) used Ball and Jewel granulator - Feed opening: 36" x 52" - Dual 100 hp - 460 volt motors - Belt driven with cyclone and infeed conveyor - Includes control panels (For images,......
UM 3477
- In feed: Conveyor feed - Cutting chamber: 16" x 20" - Rotor: 2 Knife open - Bed Knives: D2 - Screen: 5 / 16" diameter - Base: On Casters - Discharge: Bin - Motor: 20 HP 460 V - ......
UM 6013
Email Id Required.
Subject Required.
Message Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Pioneer Manufacturing Corporation
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password Required.
Password must be between 4 and 15 characters long, and may consist of hyphen (-), underscores (_), dot (.), and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.