Forgot password?Register for an account?
EmailId Required.
Email Id Not Valid.
Filter
Share This Page
For Sale - Used Plastic Grinders, Used Ganulators and Second Hand Crushers
Hopper Opening– 800 x 800 mm Motor Power Kw – 30 Rotor Diameter – 250 mm Rotor Speed – 90 rpm No. of Cutting Units – 36 off Cutter Size – 40 x 40 mm Cutting Width – 820 mm...
UM 20996
:- Europe
Model:- HR102K Hopper Opening:- 1,000 x 1,000 mm Rotor Diameter: 348 mm Rotor Width: 1000 mm Power:- 45 kw Rotor Knives – 50 Screen Size:- 15 mm Push Ram V Spec Rotor...
UM 20997
Includes operator control panel and motor starter. Shredder rotors are direct connected to 100 HP AC motor. Each shredder’s blades approximately 2" thick...
UM 20929
:- USA
Hopper Size Opening:- 50.5" W x 44.5" Tall Cutting Chamber Size:- 54" W x 23.75" Deep Rotor Knives:- Slanted Rotor Knives Bed Knives:- 2 Screen Size:- 3/8" Throughput (lbs./hr):- 350......
UM 20896
Model 1600H, Feed hopper with integrated hydraulic ram, on base, Hydraulic system with 150 hp and 50 hp hydraulic pumps...
UM 20879
Heavy duty granulator Generally Overhauled & rewired Fitted with sharpened blades Motor Power: 59 kW Throat Opening 600 mm x 1000 mm Screen size 30 mm Output approx. 1.5 tonne per h......
UM 20862
Motor power: 18.5 kW Infeed size: 800 x 1000 mm Ideal for shredding smaller plastics sections...
UM 20857
Motor: 37 kW Screen size 38 mm Infeed size: 1200 x 1200 mm...
UM 20856
Motor Power: 80 kW Feed Opening 1440 x 1150 mm Previously used for rough shredding complete window frames. ...
UM 20855
Motors 2 x 55 kW Complete with infeed and out feed conveyor and overhead magnet ...
UM 20854
Model: VAZ 200 78,74" (2.000 mm) wide x 19,68" (500 mm) diameter roll. Maximum 145 rpm roll speed. 62 interchangeable blades size 2,36" x 2,36" (60 x 60 mm). Driven 165 HP/110 KW-400 ......
UM 20843
Model: RG62/150 SPKFF Carbon Steel. Approximately 14.57" diameter x 62.99" wide cored fiber rotor with approximate 74 bolt-on cutting inserts, speed 145 rpm. Feed opening 63" wide x 80......
UM 20841
Model:- CHS819 Cutting Chamber: 8" x 19" Rotor Knives: 3-Knife Open Rotor Number of Bed Knives: 2 Screen Size: 5/16" Base: Casters Discharge: Bin Horsepower: 15 hp Electrical Req......
UM 20777
Model: 1575-E 65 x 32 Hopper Opening (34) 2" Blades / 90-95% Mounted on Heavy Duty Trailer with Discharge Conveyor and Receptacles for Additional Conveyor Under Power and Can Be Teste......
UM 20719
Model 2436CK (6090KB) 125 HP Lincoln Electric Motor 5 Fly Knifes 2 Bed Knifes Open Rotor 8" Airveyor Discharge 460/3/60 145 Amps 3/8" Screen Size Pneumatic Hopper Tilt And Cradle......
UM 20711
134 kW Hi Torq Drive Motor Rotor Diameter: 495 mm Infeed opening: 1810 mm x 2090 mm Screen size: 50 mm Hopper with interlocked door Control cabinet Water cooled hydraulic power pack......
UM 20705
Model 18" ASHD, Belt drive with approximately 75 hp motor...
UM 20699
Model 20/12RO SIL Tandem, Twin mounted 20/12 RO units, 5 hp, 460 volt each, Approximately 200 mm(8") x 120 mm (5) feed opening, With feed hopper and discharge blower,...
UM 20700
Throat: 700 x 600 mm Drive: 55 Kw Rotor Blades: 8 Stator Blades: 2 Solid Rotor 8 mm Screen High Powered Motor...
UM 20663
Throat: 400 x 350 mm Drive: 18.5 Kw Rotor Blades: 3 Stator Blades: 2 Twin Shoot Sound Proofed Heavy Duty 12 mm Screen Blower & Cyclone...
UM 20666
Email Id Required.
Subject Required.
Message Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Pioneer Manufacturing Corporation
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password Required.
Password must be between 4 and 15 characters long, and may consist of hyphen (-), underscores (_), dot (.), and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.
