Forgot password?Register for an account?
EmailId Required.
Email Id Not Valid.
Filter
Share This Page
Source used thermoforming machines, second hand vacuum forming machinery, used inline thermoforming machines, refurbished sheet extrusion lines
For Sale - Used Thermoforming Machine, Used Vacuum Forming Machinery and Inline Thermoforming Equipment
Illig roll feeder, Illig pre-heater, Model VHW 72, 30 kw heater, 480 volt, Dr. Honle UV unit, Illig thermoformer, Model RDM 70K, Illig integrated scrap grinder, Model ......
UM 21137
:- USA
Materials to be processed :- PET, PE, PP, PS, HIPS, PVC, ABS Material width :- 1200 mm Machine feeding :- Roll and Sheet feed Min and max forming area :-1200 x 2250 mm Min and max for......
UM 21128
:- Europe
Model :- RV 53b Approx hours :- 47,000 Stations :- Three Delivery date :- January 2022 Maximum forming area :- 500 x 350 mm Minimum forming area :- 300 x 100 mm Depth of draw :- 10......
UM 21080
Top And Bottom Heaters. Forming Station. Punch. Stacker And Waste Wind Up Material unwind 704 mm x 515 mm Max Forming area ( 400 x 120 mm Min) 724 mm Max tool width between mater......
UM 20953
Model RDM 50K Max forming area:- 500 x 280 mm With mechanical plug, RS75B Skeletal grinder. Illig stacker 125 mm max draw...
UM 18831
Model:- Varius SR 970 mm Sheet Width Tonnage:- 850 Kn Top Platen Open:- 460 mm Form Area:- 874 mm x 800 mm Heat Tunnel Zones:- 68 Depth of Draw:- 170 mm Max Bottom Platen Open:- 33......
UM 20714
800 mm unwind stand with pneumatic lifters 720 mm wide TFT hydraulic pressure forming thermoforming machine 740 mm max sheet width 720 mm x 525 mm forming area. 120 mm max draw 140......
UM 20485
Hours of Operation:- 14,090 Film Width Max/Min:- 22.99”/16.14” PP; 23.18”/16.14” PS Forming Area Max:- 20.66”/13.05” PP; 20.83” x 13.05” PS Depth of Draw Max:- 5.91" Clamping Pressure......
UM 20541
Max Forming Area:- 30" x 33" Form Station Stroke:- 15” Upper, 5” Lower, 75 Ton Trim Station Stroke:- 15” Upper, 5” Lower, 75 Ton Platen Drive Type:- Hydraulic Index Drive:- Servo Hea......
UM 20540
Maximum Forming Area:- 535 mm x 380 mm Minimum Forming Area:- 275 mm x 80 mm Maximum Tool Dimensions:- 780 mm x 400 mm Maximum Tool Weight:- 550 kg Maximum Height of Formed Part:- 115......
UM 20538
Type/Style:- Form, Cut, Stack, Pick and place Max Forming Area:- 825 mm x 675 mm Min Forming Area:- 480 mm x 385 mm Tool Dimension:- 850 mm (max width) x 700mm (max length) Max Top/Bo......
UM 20537
100 mm positive and 100 mm negative forming. Moving bottom cutting platen. Form cut stack. 9.6 kw top heater and 9.6 kw bottom heater. Unwind stand included. Vacuum pump. Hydra......
UM 20490
With 200" oven 150P2 trim press. Servo driven 50" x 50" forming area. 1300 mm wide Unwind stand with pneumatic lifters 1270 mm wide Lyle model FM150 thermoforming machine. 5000 mm......
UM 20493
With Steel Rule Cut In Place, Stacker And Waste Rewind PS,EPS, PP, PE, PVC, APET 120 mm Negative Or Positive Forming Max Film Width 560 mm Double Heating Upper 15 kw Lower 15 kw ......
UM 20492
With top and bottom heaters. SEW drive and Omron PLC...
UM 20491
Infeed nip Stand Max. forming area, 500 x 380 mm Max. material width, 540 mm Max. feed length, 400 mm Max. depth of the draw male/female, 120 mm Max. table lift,140 mm Max. cl......
UM 20489
40" wide sheet with max roll diameter of 60" on roll unwind stand Top and bottom heaters each 128" long infra red. Solid state heater controls 36" x 36" max forming area. With 6" abov......
UM 20488
Unwind stand with pneumatic lifter Servo chain index unit Model EF-R 28, with modern Servo drive panel 4000 mm long Oven bank with Calrod heaters, Model HT-C-R 28 160 Fast cycling fo......
UM 20487
With Schleicher PLC Controls Welex/Illig in line PP/PS thermoformer with co-extrusion sheet line and some tooling for PP/PS cups/tubs comprising 115 mm Welex single Main extruder 30D ......
UM 20486
Max sheet width 730 mm Forming area (combined forming/punching) 700 mm x 300 mm Forming area (separate forming/punching) 700 mm x 250 mm Forming area (forming only) 700 mm x 500 mm ......
UM 20484
Email Id Required.
Subject Required.
Message Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
R. R. Plast Extrusions Pvt. Ltd.
Deesha Impex
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password Required.
Password must be between 4 and 15 characters long, and may consist of hyphen (-), underscores (_), dot (.), and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.
